Sponsored

Suspension to deal with 170 lb roofnest?

Kenny Erhardt

Member
First Name
Kenny
Joined
Jun 26, 2021
Threads
4
Messages
14
Reaction score
3
Location
Evergreen Colorado
Vehicle(s)
2021 Jeep Gladiator Rubicon
Occupation
Collision Repair shop Owner
I have a 170 lb roofnest tent on yakima racks with a 3 inch lift I am looking for a fix for a top heavy roll /sway
Sponsored

 

TheSolarWizard

Well-Known Member
First Name
Memphis
Joined
Aug 5, 2019
Threads
107
Messages
3,117
Reaction score
3,794
Location
sun belt
Vehicle(s)
3.0 JT
Occupation
Solar & EV infrastructure
I have a 170 lb roofnest tent on yakima racks with a 3 inch lift I am looking for a fix for a top heavy roll /sway
Dropping the tent would of course be the easiest option.

What lift and shocks do you have and can you post pics of your front and rear swaybar links?
 
OP
OP
Kenny Erhardt

Kenny Erhardt

Member
First Name
Kenny
Joined
Jun 26, 2021
Threads
4
Messages
14
Reaction score
3
Location
Evergreen Colorado
Vehicle(s)
2021 Jeep Gladiator Rubicon
Occupation
Collision Repair shop Owner
JEV 2.5-3inch bilstien shocks factory sway bars auto disconect on front
 

TheSolarWizard

Well-Known Member
First Name
Memphis
Joined
Aug 5, 2019
Threads
107
Messages
3,117
Reaction score
3,794
Location
sun belt
Vehicle(s)
3.0 JT
Occupation
Solar & EV infrastructure
Are you driving it offroad more than say fire roads into camping areas?
 

HooliganActual

Well-Known Member
First Name
Robert
Joined
Jun 27, 2020
Threads
9
Messages
1,410
Reaction score
3,601
Location
10 miles from the Sun
Vehicle(s)
2020 Gladiator Rubicon
Occupation
Retired
JEV 2.5-3inch bilstien shocks factory sway bars auto disconect on front
Stiffer springs...

Here's what I'd recommend and it's essentially what I did. Load your vehicle up as you would for an excursion and then take it to a truck scale and weigh it. Then, work with your local offroad shop to get custom springs made for the weight you are carrying.

I mean, AEV makes an HD spring that you could use but then you still don't know (until after you purchase and install) if they will properly handle your load.

Until you weigh your setup, fully loaded, it's just expensive guesswork to find the right setup. The shop that installed my lift worked with Deaver Spring to have springs made that placed my load weight right in the middle of the spring's working range. It's probably the best way to approach the issue but not what people seem to have the patience to do...
 

Sponsored

Readyt

Well-Known Member
First Name
Ted
Joined
Jun 4, 2020
Threads
12
Messages
269
Reaction score
224
Location
McKinney, TX
Website
www.rimtyme.com
Vehicle(s)
2020 Jeep Gladiator Overland
Occupation
Franchise Business Consultant
Same issue with a 190 lb 23 Zero A2, 2 " Mopar lift
 

nethellum777

Active Member
First Name
joseph
Joined
Oct 2, 2024
Threads
0
Messages
35
Reaction score
42
Location
colorado
Vehicle(s)
2021 jeep gladiator max tow
Occupation
machinist
I have a CVT rrt that is 153lbs, the fishbone tackle half rack that is 115lbs and the body armor rear steal bumper that is around 100lbs plus about 200lbs of gear. With the stock Rubicon suspension. Are there any HD springs for just the rear that will work?
Sponsored

 
 







Top