What can we do for you?

[Jimmij]

Thanks just ordered

Sponsored

 

[LouisvEarlleJT]

Hello! What is the part number for the front springs on a Freedom edition?

thanks!

 

[BigLizzard]

I am sorry but we are not shipping fluids, chemicals or paints at this time.

- Benny

Do you have recommendations on where to find fluids where they dont try to charge 60 a quart for diff fluid? (local jeep dealer)

 

[GladLad]

@AllMoparParts.com
Can you please verify that 6511062AA is the right part for the hexagon rivnut for later-model rollup tonneau covers?

It's for the top, hexagon hole in the front of the bed. The below thread suggests it's the right part, but the linked post shows someone ordered and it wasn't the right size. May have just been the wrong part sent.

https://www.jeepgladiatorforum.com/...tonneau-cover-install-woes.44237/#post-738312

 

[bryanklay]

Benny
I sent you a message thru conversations. it is on the rear fender flairs and inner liners.
Thank you
Bryan K. Lay

 

[MMMojave]

@AllMoparParts.com

Can you order the hard top liner pieces individually?? I have the HotHeads panels but would like thr other areas to be covered so tha tmore of the interior roof is black…

 

[CoachA]

This bolt, with its integrated washer appeared on the front passenger floor. I have no idea where it came from or where it needs to go. Any idea?
The stamping on the bolt head reads ”SSC 4.8”.
Thanks for any help.

 

[AllMoparParts.com]

Hello! What is the part number for the front springs on a Freedom edition?

thanks!

Hi,
Springs are not listed based on Gladiator model Trims. There are many variations that can affect the part numbers. I can grab a VIN off Ebay and send youy the numbers but keep in mind things like engine, transmission, tow options and many more things can affect the part # used.

- Benny

 

[AllMoparParts.com]

Do you have recommendations on where to find fluids where they dont try to charge 60 a quart for diff fluid? (local jeep dealer)

Amazon is usually decent with prices for this.

- Benny

 

[LouisvEarlleJT]

Hi,
Springs are not listed based on Gladiator model Trims. There are many variations that can affect the part numbers. I can grab a VIN off Ebay and send youy the numbers but keep in mind things like engine, transmission, tow options and many more things can affect the part # used.

- Benny

that would be great actually. If you can get the part # for the springs on a gas engine freedom edition that’d be really helpful.

 

[AllMoparParts.com]

@AllMoparParts.com
Can you please verify that 6511062AA is the right part for the hexagon rivnut for later-model rollup tonneau covers?

It's for the top, hexagon hole in the front of the bed. The below thread suggests it's the right part, but the linked post shows someone ordered and it wasn't the right size. May have just been the wrong part sent.

https://www.jeepgladiatorforum.com/...tonneau-cover-install-woes.44237/#post-738312

According to the install sheet for the cover
JT Tonneau Cover NOV 13 (chrysler.com)

This is the nut https://parts.allmoparparts.com/oem-parts/mopar-installation-rivnut-6513616aa

This also applies to 2022/2023 JT's only so it confirms its for later use.

Please let me know if you have any other questions.
Thanks,
-Benny

 

[AllMoparParts.com]

Benny
I sent you a message thru conversations. it is on the rear fender flairs and inner liners.
Thank you
Bryan K. Lay

Got it, I will check it in a few

- Benny

 

[AllMoparParts.com]

@AllMoparParts.com

Can you order the hard top liner pieces individually?? I have the HotHeads panels but would like thr other areas to be covered so tha tmore of the interior roof is black…

I am sorry I do not see component pieces available separately.

- Benny

 

[AllMoparParts.com]

This bolt, with its integrated washer appeared on the front passenger floor. I have no idea where it came from or where it needs to go. Any idea?
The stamping on the bolt head reads ”SSC 4.8”.
Thanks for any help.

Looks like a painted 3.6L engine drain plug part # 6513414AA . I assume your Jeep is Black and this somehow was in there while it was painted on the assembly line.

- Benny

 

[AllMoparParts.com]

that would be great actually. If you can get the part # for the springs on a gas engine freedom edition that’d be really helpful.

Sure using this VIN https://www.ebay.com/itm/3349516272...e+e8pcKAbpZ8X5YvRCsAIgbQ==|tkp:Bk9SR-Tv95SuYg I come up with

LF 68506342AA
RF 68507796AA
LR 68506118AA
RR 68506119AA

Please let me know if you have any other questions.
Thanks,
-Benny

Sponsored