Wolf Island Diver
Well-Known Member
https://roco4x4.com/I have some Front Runner bars and would like the gutter mounts for them, want to share which retailer helped you out?
Thanks
Lass035 is the FR part. You need one set per crossbar. I also printed some little TPU cushions for the bottom of the uprights where they interface with the drip rail, so they don’t gouge the paint. I don't like the squared off almost sharp edge of the bottom of the uprights. The wedge side of these little cushions go inboard. The instructions for the basket also call for spacers for some reason. I printed those in TPU too.
I would recommend setting the distance between the uprights on each crossbar off the truck via trial and error, test fitting it to the truck. The uprights will lean outboard and pull in as you tighten them to the crossbars if you put it together on the truck. When you pull the whole assembly off you'll notice that they are slightly wider than the drip rails and were under tension against the outside edge which you don't want. Also the part of the uprights that wraps underneath don't really grab the drip rail all that tightly. They will wobble. Once both are attached to the crossbar and tightened down, it won't wobble and will be secure.
Sponsored
Attachments
-
11.8 KB Views: 42