What wheels are you putting on you JT?

[WILDHOBO]

watch the PSI close. I’m in Colorado and yesterday it was 65 degrees out. All four tires were at 37psi COLD. this morning it was 16 degrees and tires were between 29-30psi. Lots volume in these, LOL.

Always do. We’re at 8,600ft, and our temps vary lots.

Sponsored

 

[Joe Dillard]

Found a set of 4, Arsenal matte black wheels today in a size I should be happy with (17x8 5x127 +30mm offset/5.68" backspace). I ordered them after I called to verify that there were 4 in-stock & was told they are.

It's been a PITA trying to find a set of wheels I like, that were available.

These wheels should look nice.

I picked up a set of 5, M/T Baja Boss A/T's a couple weeks ago.

 

[MyRight]

Most likely going to pick up a set of Wrangler take-offs on the cheap so I have 5 matching.
Looking to put 35's and maybe 1" spacers.
I don't plan on putting a lift on it until I pick up another daily driver, so at least 2 - 3 years down the road.

 

[tenikle]

Wheel Vintiques Smoothies. 17x9. 4.25" backspace.

mind sharing the wheel link you went for and any mods to get them to fit? Are they US Wheel 69s?

 

[Gren71]

Just picked up some JL rubi wheels im pretty excited about. I haven’t seen anyone with them around here so they should look pretty slick on the Jt.

 

[Fouts]

Started out with the Icon Rebound I had on my JL but did not like how much they stuck out from the fender. -6 offset. Recently put on some AEV Salta +25 offset and am really happy with the look. Wheels seem to be of high quality.

 

[wv_gladiator]

I have been looking for aftermarket wheels for my JT and thought I would ask everyone for their input.

Recon wheels from quadratec

 

[FshnRdnJpnAB]

I searched for a long time and finally decided on Fuel Militia wheels. They certainly don’t seem to be a common choice but I love them. I saw someone else on the forum with these wheels so there’s at least two of us

 

[Joe Dillard]

Had them mounted and balanced on a set of Baja Boss tires and hope to have them on the JT soon.

 

[AustinL911]

Started out with the Icon Rebound I had on my JL but did not like how much they stuck out from the fender. -6 offset. Recently put on some AEV Salta +25 offset and am really happy with the look. Wheels seem to be of high quality.

Lookin' good!

For the life of me, I cannot understand why wheel manufactures put so much negative offset into their wheels. That's been my biggest struggle in finding a set of wheels that I like; perfect size, perfect style, perfect finish, …..-18mm offset. Pass....

I almost wonder if there are any companies out there that will chuck the wheels up in a lathe and machine off some material from the hub mating surface, pending there is enough material to work with and it was safe to do so, which, it probably wouldn't be.

Ah well, the search continues.

 

[muhlillo]

What wheels are these?

https://www.aev-conversions.com/product/savegre-ii/

 

[chorky]

Some nice options folks have chosen here. Is anyone running either a Rubicon or a Max Tow on a 33x10.5 tire with 4.75 backspacing? Curious if there's any rubbing full lock when fully flexed, and how much / if there is any tire sticking past the fenders. I have tried looking at this but not quite sure if the axle/fender dimensions are accurate.
https://www.wheel-size.com/calc/?wh...5-17X8.5ET0&fcl=50mm&wcl=30mm&scl=50mm&sr=0mm

 

[WILDHOBO]

Some nice options folks have chosen here. Is anyone running either a Rubicon or a Max Tow on a 33x10.5 tire with 4.75 backspacing? Curious if there's any rubbing full lock when fully flexed, and how much / if there is any tire sticking past the fenders. I have tried looking at this but not quite sure if the axle/fender dimensions are accurate.
https://www.wheel-size.com/calc/?wh...5-17X8.5ET0&fcl=50mm&wcl=30mm&scl=50mm&sr=0mm

32.8 is stock for Rubicons, so I’d expect to see zero rubbing, even at full flex with the saw bar disconnected.

 

[chorky]

That's what I am hoping for but not quite sure what stock backspacing is.

 

[WILDHOBO]

Mounted. Here are the pictures I promised. They ride great. Currently at 35psi. 37x12.5x17 Mickey Thomson Baja Boss AT. 2021 Rubicon wheels. No regrets. I like the look.

Sponsored