What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Tuggernuts]

Your mistake was not getting Dunkin..

No Dunkin in my town.

Sponsored

 

[Casique]

On the positive side, it will smell better...

 

[-miko-]

Today I dumped a completely full Trenta(30oz) iced coffee on my passenger seat and carpet. ?‍ That’s what I did to my Gladiator today. FML

A perfect excuse to replace the carpets with Armorlite?

 

[Tuggernuts]

A perfect excuse to replace the carpets with Armorlite?

Absolutely

 

[HooliganActual]

On the positive side, it will smell better...

Unless there was any dairy in it. I've spilled a latte in a car before and when that milk/cream sours in the carpet, it is unforgiving...?

 

[Bbannongmu]

installed my Ace inner fenders



#JTRSPARTACUS

 

[BlueScapegoat]

Installed my discount special Badland Apex 12k winch utilizing a Rock Hard 4x4 mounting plate.

I installed a winch on my TJ in 30 minutes. This must have taken 8+ hours. What a fiddly pain in the ass it was. All lined up and snug now, though. Worth it, as long as it holds up... My first time not buying a Warn.

 

[Tuggernuts]

Unless there was any dairy in it. I've spilled a latte in a car before and when that milk/cream sours in the carpet, it is unforgiving...?

Plenty of dairy. ?‍

 

[bshenderson1]

No Dunkin in my town.

Blasphemy, I say!

 

[jmdwifi]

Well it took six months but after a long ordeal with re-gearing and flawed stock axle, ordering a spicer Dana 60 but needed 5 lug mounts and the shorter width of my stock axle, it is in.
I finally have 4.56 gears and no whine I think. I missed my truck so much. I did get a good deal on a 2016 2dr Rubicon to drive while I waited for the axle. I'm gonna use the 2 dr for work and keep the miles off my JT.

 

[mdyucca]

i realize this. Which is why I made comment about the duty cycle (which for this solenoid is not known at the moment). The part numbers match a warn product and in fact come in a warn box. Them matching numbers I found were on several sites. In fact I first found it on multiple parts suppliers sites that are not amazon. Amazon is just easier to google and link to. Normal amazon products are not really trustworthy. But sometimes numbers match and this one did when i check several months ago. All of the seller options I found, amazon and legit parts suppliers show the same 63001 solenoid as a warn product.

I am inclined to believe the specs quadratec offers. I know a lot of people dont like them due to their prices. however every time i have asked them for a specification of a product, i also cross reference that spec with the manufacturer, and for me anyway it has always been accurate. The main potential issue in this specific case is the product linked to of quadratec is the entire warn disconnect kit which includes a solenoid, wires, and switch. And that kit does not specify a part number. So it is not known with certainty if that kit has the same 63001 solenoid or if it is a different one. so hopefully we will hear back with certainty tomorrow.

I received an email from Cydnee with Warn advising a spec sheet is being put together. Will keep you posted.

 

[Minty JL]

Finished the front half of the wiring harness for my chase/rack lights. I made it a 2 section harness so if I want to remove the rack I don't have to remove the whole harness.

More to follow

 

[mx5red]

Finished the front half of the wiring harness for my chase/rack lights. I made it a 2 section harness so if I want to remove the rack I don't have to remove the whole harness.

More to follow

That is a sexy DIY distribution block, sir!

 

[Minty JL]

That is a sexy DIY distribution block, sir!

Thanks it the Auxbeam solid state 8 gang.

I'm OCD with my installs, so everything has to be in order and look as close to OEM as possible

 

[rcraighughes]

I got my AEV lift, salta xr rims, and 37 in BFGs installed

Sponsored