37’s with no lift!

[PsyRN]

2020 Overland
37s No Lift
BFG KO2 37x12.5x17
AEV JK Silver Pintler 17x8.5

I'm looking at a set of JK AEV Pintlers and was wondering if they would fit. Guess this answers my question.

Sponsored

 

[Smile&wave]

2020 Overland
37s No Lift
BFG KO2 37x12.5x17
AEV JK Silver Pintler 17x8.5

I LOVE IT! Ferrari vibes. Have you considered splitting the fenders?

 

[F1REICE]

I LOVE IT! Ferrari vibes. Have you considered splitting the fenders?

Here are few with the split fenders and 37s with no lift
Been running this for 4 months and no issus no rubbing

 

[BaneKotaKeena]

2020 Overland
37s No Lift
BFG KO2 37x12.5x17
AEV JK Silver Pintler 17x8.5

No rubbing on road like this? If so, this changes my mind from messing w/35's to going right to 37's and the AEV Borah's right out the gate.

 

[Sw00per]

Here are few with the split fenders and 37s with no lift
Been running this for 4 months and no issus no rubbing

What does your tires measure under load?

 

[Camaroboi13]

What does your tires measure under load?

KO2s are usually under 36”, closer to 35.5”

 

[Sw00per]

KO2s are usually under 36”, closer to 35.5”

Oh you running K02s. Ihave the same and under load they are under 34. maybe I need to go on a diet lol

 

[Camaroboi13]

Oh you running K02s. Ihave the same and under load they are under 34. maybe I need to go on a diet lol

Nope, not me. I just know how they roll, and it’s always the smallest tire out there. I wouldn’t be caught dead with KO2s on my Jeep ?

 

[Escape.idiocracy]

Nope, not me. I just know how they roll, and it’s always the smallest tire out there. I wouldn’t be caught dead with KO2s on my Jeep ?

Really? Ko2’s aren’t bad I just think it sucks that their 37’s are so expensive…
https://www.northridge4x4.com/part/52341-bfgoodrich-all-terrain-t-a-k02-39x13-50r17lt-tire ??

 

[Camaroboi13]

Really? Ko2’s aren’t bad I just think it sucks that their 37’s are so expensive…
https://www.northridge4x4.com/part/52341-bfgoodrich-all-terrain-t-a-k02-39x13-50r17lt-tire ??

Haha right! I can get their 35s for under 280 each all day, not sure what justifies more than doubling the price for another 2 inches.
And yes, I’m talking about the ones that say 37” on the side ?

 

[Escape.idiocracy]

Haha right! I can get their 35s for under 280 each all day, not sure what justifies more than doubling the price for another 2 inches.
And yes, I’m talking about the ones that say 37” on the side ?

It is pretty nuts $450 for 37” is eh not too far off many others…. $675 for 39’s that measure what they do I think is crazy.
I am the odd duck out…. Patagonia XT’s $290 for 37’s and $365 for 40’s ? measure true to size…

 

[Camaroboi13]

It is pretty nuts $450 for 37” is eh not too far off many others…. $675 for 39’s that measure what they do I think is crazy.
I am the odd duck out…. Patagonia XT’s $290 for 37’s and $365 for 40’s ? measure true to size…

The 37s are $960 for 4 tires near me for BFGs. Still wouldn’t buy them

 

[Sw00per]

It will be some time before I buy new tires... I will be looking at the K03s since they should be out by then.

 

[FijiKid]

Love this forum. Great info. Thanks all! … so I just ordered a set of 37x12.5 17’s Kenda Kevlar RT. Original plan was to wait and have it lifted first … but decided to pull the trigger. Wheels are 8.5, 0 offset. Also have high clearance flat fenders. I like the stuffed look also…

next will be gears for me. Then, possibly a 2” lift.

Thoughts? … Anything I should be aware of? Thanks again!!!

 

[Ericshere03]

Something to keep in mind, diesels have longer bumpstops in front … I’d imaging that if a gas JT fits 35’s (which they do) then 37’s will fit a diesel. I think the front is tighter than the rear …

I am building a suspension based on the Mopar lift for my 23 eco diesel. I wanted to use Bilstein 5160’s which don’t need any additional bumpstop and have a little over 12, inches of travel. I was just reassuring my thinking. If stock ecodiesel with rubicon flares fit 37’s then Mopar 2” lift WITHOUT the bumpstop extensions will fit too …

PS: the components for the Mopar lift are only about $550 bucks, minus shocks, crate and badge… you can put better shocks and still save money. I used Icons on my first gladiator, complete Mopar lift with fox shocks on number 2 gladiator and this time around I may do bilstein 5160

Sponsored