What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[bgott]

I installed the airlift airbags in my mojave. I brought the lines out through the top bolts for the license plate. My only question is how to measure 5PSI. I have nothing that measures air pressure that low.

Tractor supply has a low pressure gauge that goes down that low.

Sponsored

 

[Freems]

I installed the airlift airbags in my mojave. I brought the lines out through the top bolts for the license plate. My only question is how to measure 5PSI. I have nothing that measures air pressure that low.

A tire guage

 

[jeepers29]

A tire guage

My tire gauges don't go that low. I found a pressure gauge on amazon that says it registers down to 2 PSI. We will see if it is accurate.

 

[jeepers29]

Tractor supply has a low pressure gauge that goes down that low.

Thank you

 

[40x40]

I installed the airlift airbags in my mojave. I brought the lines out through the top bolts for the license plate. My only question is how to measure 5PSI. I have nothing that measures air pressure that low.

harley davidson made a gauge with a hand pump for their air shocks on pre 2009 dressers. memory says it went 0-15 psi.

 

[jeepers29]

harley davidson made a gauge with a hand pump for their air shocks on pre 2009 dressers. memory says it went 0-15 psi.

Thank you.

 

[WILDHOBO]

harley davidson made a gauge with a hand pump for their air shocks on pre 2009 dressers. memory says it went 0-15 psi.

It might just be easier to use a bike pump. If you have one, no need to buy anything.

 

[BaneKotaKeena]

Wheels/tires ordered:

The tires are 34.4 per site.

Hoping that will be enough of a tire upgrade and visual impact for now until a full 2-2.5" lift can go on later this or next year. Supposed to be delivered Friday (mounted and balanced).

Wheels are -6 offset so hoping they will be fine as-is short term. If not, I have the 1.5" TeraFlex spacers for front and 3/4" Daystar spacers for rear.

Looking forward to it after last nites little blast of winter on those 20" tires... Felt like skates. Would much rather have some more rubber under me. Pics forthcoming after I get them on.

Oh yeah, installed the hood struts too.

 

[19Comanche86]

Installed the Truemods led headlights and DRLs. Really impressed with the quality and fitment. Halos look awesome. We will see how the cut off is tonight.

OEM Led tail lights come Wednesday and that will be it for a bit on mods.

 

[GI Grandpa]

Added ARB Twin compressor under the front passenger seat

 

[GI Grandpa]

Added Rokblokz mudflaps and Mopar flare extensions

 

[Sempe-Fi Rubicon]

Added 3 badges today from my last trip out. Thanks UPS

 

[WestwallNF104A]

Finished specking out the OVRLND camper, so delivery is June 13th. And finished the underhood part of the ARB compressor install. I still have to mount the air tank, and run the air lines to that, and a line to the rear bumper with a chuck, but I am going to wait till I get the new bumper installed before I do that.

I didn't want air lines looping all over the place so I made some shorter ones.

 

[Bacstar]

we need more backstory than that?! Bent how!?

pothole on a snow covered road... going about 45mph... luckily didn't totally lose control and go off the road. broke my steering stabilizer and passenger side axle housing about 6 degrees bent back and up. My steering wheel was a full quarter turn off to the left.

 

[PuddleJumper]

pothole on a snow covered road... going about 45mph... luckily didn't totally lose control and go off the road. broke my steering stabilizer and passenger side axle housing about 6 degrees bent back and up. My steering wheel was a full quarter turn off to the left.

Damn! What front axle u got? A Dana 30?

Sponsored