2021 JT 3.6 Fuses - Diagram, Location, Description, Count & Spares

[RubiDukkie]

I did this for my 2021 Jeep Gladiator Rubicon w/Engine: 3.6L V6 24V VVT Engine w/ESS, Trailer–Tow Package, Cold Weather Group, Premium LED Lighting Group, Jeep Active Safety Group, Auxiliary Switch Group, 8–Speed Automatic 850RE Transmission, Alpine Premium Audio System and Wireless Bluetooth Speaker.

If you have the same trimline and options, then this should match your Gladiator. For everyone else, YMMV.

The color coding for the "Size" column got lost in the cut/paste to the forum, but I have also attached "2021 JT 3.6 Fuses.pdf" for reference.

* = IF EQUIPPED

Loc.​	Size​	Type​	Description
F01​	50A​	Cartridge​	SPARE*
F02​	40A​	Cartridge​	STARTER
F03​	5A​	Micro​	IBS - Intelligent Battery Sensor
F04​	20A​	Micro​	FUEL PMP MTR/FPCM - Fuel Pump Motor/Fuel Pump Control Module
F05​	5A​	Micro​	SECURITY GATEWAY
F06​	N​	Micro​	SPARE*
F07​	N​	Micro​	SPARE*
F08​	15A​	Micro​	TCM - 8HP CYGNUS - Transmission Control Module
F09​	N​	Micro​	SPARE*
F10​	15A​	Micro​	KIN/RF HUB/ESCL - Key Ignition Node/Radio Frequency Hub/Electric Steering Column Lock
F11​	10A​	Micro​	UCI PORT (USB & AUX)
F12​	25A​	Micro​	HIFI AMPLIFTIER
F13​	N​	Micro​	SPARE*
F14​	N​	Micro​	SPARE*
F15​	15A​	Micro​	IPC/SWITCH BANK - HD ELEC - Instrument Panel Cluster/Switch Bank-Heavy Duty Electrical Pkg
F16​	N​	Cartridge​	SPARE*
F17​	N​	Cartridge​	SPARE*
F18​	10A​	Micro​	AC CLUTCH - Air Conditioning Clutch
F19​	N​	Micro​	SPARE*
F20​	30A​	Cartridge​	CBC 1 - INTERIOR LIGHTS - Central Body Controller
F21​	N​	Micro​	SPARE*
F22​	10A​	Micro​	ECM/PCM - Engine Control Module/Powertrain Control Module
F23​	10A​	Micro​	ECM/PCM - Engine Control Module/Powertrain Control Module
F24​	N​	Cartridge​	SPARE*
F25​	10A​	Micro​	MOD_SBW - Module Shift By Wire
F26​	40A​	Cartridge​	CBC 2 - EXTERIOR LIGHTS #1 - Central Body Controller
F27​	30A​	Cartridge​	FRT WIPER - Front Wipers
F28​	40A​	Cartridge​	CBC 3 - POWER LOCKS - Central Body Controller
F29​	40A​	Cartridge​	CBC 4 - EXTERIOR LIGHTS #2 - Central Body Controller
F30​	N​	Cartridge​	SPARE*
F31​	10A​	Micro​	DIAGNOSTIC PORT
F32​	10A​	Micro​	HVAC CTRL MOD/SCL/OCM/DPDM - Heating Ventilation Air Conditioning Module/ Steering Column Lock/Occupant Classification Module/Driver Presence Detection Module
F33​	10A​	Micro​	PTS/IRCM/AIRBAG DISABLE LMPS - ParkTronics System/nfrared Camera Module/Airbag Disable Lamps
F34​	10A​	Micro​	ESC/EHPS/SBCM WAKE UP - Electronic Stability Control/Electric Hydraulic Power Steering/Smart Bar Control Module
F35​	30A​	Cartridge​	BRAKE VAC PMP* - Brake Vacuum Pump
F36​	30A​	Cartridge​	TRLR TOW ELEC BRK MOD* - Electric Brake Module
F37​	30A​	Cartridge​	TRLR TOW CONN 7W* - Trailer Tow Connector
F38​	20A​	Cartridge​	ECM - Engine Control Module
F39​	N​	Micro​	SPARE*
F40​	15A​	Micro​	DTCM/AXLE LOCK FT_RR – DriveTrain Control Module/Axle Lock
F41​	15A​	Micro​	IC/SGW WAKE UP - Instrument Cluster/Security GateWay
F42​	10A​	Micro​	PCR CTRL FEED (ESS)* - Power Control Relay Control Feed
F43​	N​	Micro​	SPARE*
F44​	10A​	Micro​	IRCAM HEATERS - InfraRed Camera Heaters
F45​	N​	Micro​	SPARE*
F46​	10A​	Micro​	AUTO HDLP LVL MOD/LVL MTR/HDLP SW - Auto Headlamp Leveling Module/Headlamp Leveling Motors/Headlamp Switch
F47​	N​	Micro​	SPARE*
F48​	N​	Micro​	SPARE*
F49​	10A​	Micro​	ORC - Occupant Restraint Controller
F50​	10A​	Micro​	HD ACC* - Heavy Duty Aссessory
F51​	10A​	Micro​	USB/ISRVM/COMPASS/MOD/HLRS/INVERTER 400W – USB/InSide RearView Mirror/ Compass Module/Humidity Light Rain Sensor/Inverter 400W
F52​	20A​	Micro​	CIGAR LTR - Cigarette Lighter
F53​	10A​	Micro​	WIRELESS SPEAKER*
F54​	N​	Micro​	SPARE*
F55​	10A​	Micro​	CVMP* - Central Vision Processing Module
F56​	10A​	Micro​	IN-CAR TEMP SENSOR/PTC HTR COIL FEED - In Car Temperature Senso/ PTC Heater Coil
F57​	20A​	Micro​	DRIVER HTD SEATS - Front Driver Heated Seat
F58​	20A​	Micro​	PASS HTD SEATS - Front Passenger Heated Seat
F59​	N​	Cartridge​	SPARE*
F60​	15A​	Micro​	CSWM (HTD STR WHEEL) - Comfort Steering Wheel Module (Heated Steering)
F61​	10A​	Micro​	LBSS/RBSS - Left Blind Spot Sensor/Right Blind Spot Sensor
F62​	N​	Micro​	SPARE*
F63​	10A​	Micro​	ORC - Occupant Restraint Controller
F64​	N​	Micro​	SPARE*
F65​	50A​	Cartridge​	POWER INVERTER 400W
F66​	40A​	Cartridge​	HVAC BLOWER MTR FRT - Front Blower Motor
F67​	N​	Micro​	SPARE*
F68​	N​	Micro​	SPARE*
F69​	N​	Micro​	SPARE*
F70​	25A​	Micro​	INJ/IGN COIL (GAS)/GLO PLUG MOD (DSL) – Injectors/Ignition Coils
F71​	N​	Micro​	SPARE*
F72​	10A​	Micro​	HD ELEC ACC PKG*
F73​	N​	Cartridge​	SPARE*
F74​	N​	Cartridge​	SPARE*
F75​	25A​	Micro​	SPARE*
F76​	20A​	Micro​	ECM (GAS)/PCM (DSL) - Engine Control Module
F77​	10A​	Micro​	HTD MIRRORS - Heated Mirrors
F78​	N​	Micro​	SPARE*
F79​	20A​	Micro​	SMART BAR CTRL MOD - Smart Bar Control Module
F80​	15A​	Micro​	PCM/SOL 1 2 BLOCK SHIFT - Powertrain Control Module/ Solenoid No.1 & No.2 Block Shift
F81​	30A​	Cartridge​	REAR DEFROSTER (EBL) - Rear Window Defroster
F82​	N​	Cartridge​	FUEL HTR* - Diesel: Fuel Heater [30A Pink]
F83​	N​	Cartridge​	GLOW PLUG* - Diesel: Glow Plug [60A Yellow]
F84​	N​	Cartridge​	UREA HTR CTRL UNIT* - Diesel: Urea Heater Control Unit [30A Pink]
F85​	N​	Micro​	PM SENSOR* [10A Red]
F86​	N​	Cartridge​	SPARE*
F87​	N​	Micro​	SUPPLY/PURGING PMP* - Purging Pump Supply [10A Red]
F88​	N​	Cartridge​	NOX SENSOR #1/#2* - NOx Sensor No.1 & No.2 [20A Blue]
F89​	10A​	Micro​	SCCM/CRUISE CTL/DTV/AIRBAG DISABLE LAMP - Steering Column Control Module/Cruise Control/Digital TV/Airbag Disable Lamp
F90​	20A​	Cartridge​	TRLR TOW PARK LMP* - Trailer Tow Parking Lamp
F91​	20A​	Micro​	HORN
F92​	40A​	Cartridge​	HD ACCY #2* - Heavy Duty Accessory No.2
F93​	40A​	Cartridge​	HD ACCY #1* - Heavy Duty Accessory No.1
F94​	10A​	Micro​	TPM/CORAX - Tire Pressure Monitor/RF Hub System
F95​	N​	Micro​	SPARE*
F96​	10A​	Micro​	PWR MIRROR SW - Power Mirror Switch
F97​	20A​	Micro​	RADIO/TBM – Radio/Telematic Box Module
F98​	10A​	Micro​	SW BANK - HD ELEC/OFF ROAD - Switch Bank - Heavy Duty Electrical/Off Road
F99​	N​	Micro​	SPARE*
F100​	30A​	Cartridge​	ESC - ECU & VALVES - Electronic Stability Control - Control Unit & Valves
F101​	30A​	Cartridge​	DTCM - DriveTrain Control Module
F102​	15A​	Micro​	DUAL USB PORT
F103​	15A​	Micro​	HD ACCY #3* - Heavy Duty Accessory No.3
F104​	N​	Micro​	SPARE*
F105​	10A​	Micro​	ICS/HVAC - Integrated Center Stack/Heat Ventilation Air Conditioning
F106​	50A​	Cartridge​	ESC - PUMP MTR - Electronic Stability Control - Pump Motor
F107​	20A​	Micro​	TRLR TOW STOP/TURN LT* - Trailer Tow Stop/Turn Left Lamps
F108​	15A​	Micro​	HD ACCY #4* - Heavy Duty Accessory No.4
F109​	20A​	Micro​	TRLR TOW STOP/TURN RT* - Trailer Tow Stop/Turn Right Lamps
F110​	N​	Cartridge​	SPARE*
F111​	20A​	Cartridge​	TRLR TOW BACKUP* - Trailer Tow Backup Lamps

REPLACEMENT FUSES (RF)

Loc.​	Size​	Type​	Description
RF1​	50A​	Cartridge​	Located upper-left in fuse box
RF2​	40A​	Cartridge​	Located lower-left in fuse box
RF3​	30A​	Cartridge​	Located lower-left in fuse box
RF4​	20A​	Cartridge​	Located lower-left in fuse box

MICRO FUSE COUNT (and recommended number of spares to have)

Size​	Count​	Spares​	RF​
5A​	2​	1​	1​
10A​	27​	2​	1​
15A​	20​	2​	1​
20A​	10​	1​	0​
25A​	3​	1​	0​

Note: RF column – spare fuses already in a fuse box RF slot.

Sponsored

 

[Hootbro]

Yours looks better than the factory layout diagram.

 

[RubiDukkie]

BTW, there is a 20A & 25A replacement fuse already there. Location 75 has the 25A spare and straight down on my diagram from there is the RF yellow location with a 20A spare.

 

[Lunentucker]

Cool!
Mine should be pretty close, but I have a Mojave, so the orange dispenser fuse isn't shown here.

 

[RubiDukkie]

Also, I can make my MS Word doc and Paint doc available if anyone wants it. I'm guessing I could just attach them to this thread. The only thing I am uncertain about is the Paint file. I used an app called Paint S which is for the Mac. Not sure if it is compatible with other Paint programs or not.

 

[NorthCountry]

I have a question. Your diagram surely shows your efforts, thank you for sharing. I have a 2023 Gladiator Sport. No frills or extras. The previous owner had installed a Rugged Ridge snorkel. The kind that has the air intake run across the top of the battery and fuse box. I didn't like that and so I brought everything back to the stock configuration. No more snorkel.
3 times after that I went in to start the jeep. Opened the door all the lights came on as normal. Jeep logo across the u-connect screen, all good. Stepped on the brake to push in the start button, and when I did, all the lights on the dash went out.
I opened the hood, checked the terminals and looked at the fuse box to see if I could see anything. Nothing, but when I went back in the jeep, the lights were on and the jeep started right up.
My first attempt to do something was to push all the fuses and relays in to make sure hey were seated. All good. Then it happened twice after that. Same thing, move a few things around and it starts right up.
Is there a dedicated fuse for the start push button? One I can keep an eye on.
Sorry for the long question, but thanks for your consideration.

 

[RubiDukkie]

There are plenty of people on this forum that are smarter than me about this stuff. The only two fuses in the diagram that jump out at me as possibilities to check are F02, STARTER and F42, Power Control Relay Feed (ESS). That is just a guess on my part. If those fuses are good and fully seated, then I would try putting in a new key fob battery. According to the "ENGINE 3.6L Starting (Service Information)" manual:

KEYLESS IGNITION NODE (KIN) OR KEYLESS GO BUTTON
When the operator presses the Keyless Go button, the key fob is validated wirelessly by the RFH. If the key fob is recognized as belonging to the vehicle and is inside the vehicle, the system allows the ignition state of the vehicle to be changed by the operator between the ACCESSORY, RUN, and START ignition states.

My thinking is if the key fob battery is low, maybe the validation signal doesn't always work correctly.

Lastly, I am wondering if a bad Auxillary battery, which is tied into the Electronic Start/Stop (ESS), could cause this kind of issue. The auxiliary battery is located underneath the main engine battery. Do a search on "auxiliary battery delete" in this forum and you will find lots of wonky issues caused by it going bad.

 

[Majorshelton]

Does anyone know where I can find the pinout diagram for this plug? I have been having crazy issues since March and finally just started going through each plug and pin and found 2 wires taped together (must have been done at a dealership because it isn't factory) and a loose green wire. I need to know where those wires are supposed to be pinned in order to correct this mess. Hoping that is the root cause. I have always thought solid green wires are usually ground wires. A bad ground could be the root cause. Thanks in advance.

 

[Hootbro]

Does anyone know where I can find the pinout diagram for this plug? I have been having crazy issues since March and finally just started going through each plug and pin and found 2 wires taped together (must have been done at a dealership because it isn't factory) and a loose green wire. I need to know where those wires are supposed to be pinned in order to correct this mess. Hoping that is the root cause. I have always thought solid green wires are usually ground wires. A bad ground could be the root cause. Thanks in advance.

I am going to assume that is the Assembly Power Distribution Center C3 connector but see the attach file to verify.

You can look up the connector pin outs at the below link.

https://connectorrepairkit.mopar.com/

 

[Majorshelton]

That looks like exactly what we need. Thank you so very much!!!!

 

[Hootbro]

Attached is some diagrams that should help of what goes where off the fuse Power Distribution Center Panel

 

[Majorshelton]

Thanks again!!!

 

[Hootbro]

Thanks again!!!

Did you buy it used? That is some ghetto hack wiring, even for a dealership.

 

[Majorshelton]

Nope. Had 8 miles on it. Had the top end rebuilt last year at a dealership and also had the OEM aux switches installed at a dealership, as well as a shorting wire search that was causing my windows and locks to intermittently not work. That is nothing I did and I doubt my other mechanic did it. Unfortunately it doesn't run well enough to get to that dealership. They broke a VVT solenoid plug and repaired it with black tape, too. That is why I think it was that dealership.

 

[AZFoxes]

Brake light fuse help needed.

I need to install a “Brake-lite Relay Kit” on my ‘24 Gladiator Mohave for dingy towing the Gladiator behind our motorhome. The first step in the installation directions, annotated with cautions and warnings, is to remove the brake light fuse. I don’t see the brake light fuse listed under the fuse panel cover, nor on the diagram above. Does anyone know where this fuse is located?

Sponsored