Shocks with lifts and leveling kits

[ToplessGirl79]

I am currently running the Mopar 2” lift with the Teraflex leveling kit. I need new shocks and I noticed that my springs were ever so slightly bowed. I’m not sure it this is because the shocks are completely shot or because the shocks are too short.

My real question is this … should I be getting shocks for a 4” lift in the front to accommodate for both kits or stick with the 2” lift shocks the Mopar lift kit came with?

Sponsored

 

[Wheelin98TJ]

You want longer shocks for the taller 4" lift height.

 

[ToplessGirl79]

You want longer shocks for the taller 4" lift height.

Thanks! I thought so but I also thought I was overthinking it. This might be dumb but it would just be the front correct?

 

[Wheelin98TJ]

Thanks! I thought so but I also thought I was overthinking it. This might be dumb but it would just be the front correct?

Not dumb, good questions to make sure you get the right shocks.

You’re correct, just the front. Since no spacer in the rear, you can use the same length shocks.

 

[GI Grandpa]

New shocks or shock relocation brackets if your current shocks are still good.
TeraFlex JL/JT 2" Shock Extension Bracket Kit - Front (2-2.5" Lift)

Sponsored