What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[scotticus]

Last thing for a while, Warn VR Evo 12-S and Factor55 Prolink.

Sponsored

 

[ColoradoGlad]

Upgraded my Sport S fender flares to Rubicon LED. Not too difficult

Did the wiring for the driving lights directly hook up? I heard the plugs were different?

 

[tbaker]

Picking my gladiator up tomorrow from the shop have AMP research XL power steps installed wife is having a hard time getting in the gladiator

 

[Dave S]

Did the wiring for the driving lights directly hook up? I heard the plugs were different?

Yes the plug is the same. Used my taser to turn onDRL. No issues at all

 

[Ghostrider29]

Powder coated black rings, so much cleaner looking then the aluminum!

 

[Daizey]

Homage to my fav movie.

 

[Joker4L]

Mopar lift installed!! Takes a lot of patience and an extra hand to make it much easier. Did it in my garage taking my time. Took me roughly 4hrs from start to finish

uploaded a photo comparison of both the old and new front springs and front shocks

 

[Trauma PA]

Added 35s and new wheels without a lift, which I kind of like not raising the center of gravity and further decreasing MPG.

Added 35s and new wheels without a lift, which I kind of like not raising the center of gravity and further decreasing MPG.

Looks really good. I've got a black Rubicon as well and I'm thinking about doing the same exact thing. What kind of MPG you getting rolling on those 35s?

 

[mojocho]

Picked up a Gladiator off the lot at my local

 

[mojocho]

Added some basic stuff. Front side windows tinted. Added Bullet Liner bed liner, Bushwacker hood guard, Mopar sill guards, weathertech floor mats.

 

[Proximo]

Added some basic stuff. Front side windows tinted. Added Bullet Liner bed liner, Bushwacker hood guard, Mopar sill guards, weathertech floor mats.

Very nice. Welcome. Plenty of info here

 

[FL Handle Guy]

Tied into the battery constant hot (red/white stripe) 10A wire in the aux switch bundle for a cigarette plug that stays on even when the jeep is not. Wired in a 5A fuse and grounded it to a spare bolt behind the passenger kick panel. I removed the cover for one of the console bolts and used m6x40mm bolt so it did not require drilling any holes in the plastic.

 

[MarineHawk]

Looks really good. I've got a black Rubicon as well and I'm thinking about doing the same exact thing. What kind of MPG you getting rolling on those 35s?

I can't tell the difference, but it's hard to make sure it's apples-apples. It's definitely not off by much.

 

[OMTBiker]

Added some basic stuff. Front side windows tinted. Added Bullet Liner bed liner, Bushwacker hood guard, Mopar sill guards, weathertech floor mats.

How do you like the Bullet Liner? Where did you have it installed, have an pictures of the liner? I am trying to decide between Line-X and Bullet Liner.

 

[mojocho]

How do you like the Bullet Liner? Where did you have it installed, have an pictures of the liner? I am trying to decide between Line-X and Bullet Liner.

This stuff is great. Some videos online from the manufacturer on the strength. If you read up about it, bullet liner was created by the guy who sold line x to a company. Newer tech, better uv resistance, cheaper usually. It was $100 cheaper when I compared two local installers. Ymmv

I went to Off The Grid Motorsports in Canton.
http://offthegridmotorsports.com/

These guys are great. They do a lot of Jeep builds. They did my tint as well. I'll be going back to them for anything I don't want to install myself. Last year I called them thinking about a Big Brake kit for my JKU. We talked about what mods I had and me intended use. He talked me out of it and suggested something much much cheaper. He said, "I can sell and install what you want but I think this would work better for.". Don't find that too much these days.

I'll post some pictures when the so comes up.

Sponsored