What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[chrcal14]

I finished in stalling my Mopar steel bumper, skid plate for steel bumper, winch guard, and Mopar 7 inch off-road lights.

Those things are bright aren't they? I thought the LED headlights were nice and bright, but those things are easily twice. Looks great.

Sponsored

 

[Tacoman03]

FYI....the Mopar Flaps do fit on the rear BUT not the front on the Rubicons.....found out after having dealer try as well as a 4X4 ship try to install rear set.

I've always put on the MOPAR type - on all of my Grand Cherokees, etc. and they help a ton on those, helped a lot when I put the GM offering on my Silverado, too - they help on my JT but when a vehicle has that much tire exposed - nothing is perfect, but they do help.

 

[hjdca]

Those things are bright aren't they? I thought the LED headlights were nice and bright, but those things are easily twice. Looks great.

Super bright and super floody. Great view to the sides and up. I would say at least 3 times as bright as the headlights and the lenses get warmer much faster than the head lights. It is pretty much daylight upfront with these lights. They are very impressive and the hardware is top notch -- aiming, setup, vibration isolation are all top of the line.

Here is a shot of the stock low beams LED

Here is a shot of the stock low beams LED with the Mopar 7 inch off-road lights.

 

[ShadowsPapa]

FYI....the Mopar Flaps do fit on the rear BUT not the front on the Rubicons.....found out after having dealer try as well as a 4X4 ship try to install rear set.

When I bought I told the guy "JT Overland" and he walked back and 2 minutes later had 2 pair - rears were marked "Gladiator" and the fronts were marked "Wrangler". So............. do they have Rubicon specific pairs? I dunno, just passing what I got for mine and they are a factory perfect fit exactly, couldn't have fit or been any easier, for my Overland..........

But it's good to warn folks - watch out and check with your parts guy if you have a Rubicon. They may figure rock crawling folks won't want such things on their Jeeps, I dunno.

 

[ShadowsPapa]

Yes, with double-stickyback tape (two strips already mounted to each guard). Pretty strong stuff. Instructions warn to properly place the first time. You won't be able to move because the "adhesive is aggressive".

Love that - "adhesive is aggressive". Well I'm sold. Think I'll get a set ordered.

 

[chrcal14]

Super bright and super floody. Great view to the sides and up. I would say at least 3 times as bright as the headlights and the lenses get warmer much faster than the head lights. It is pretty much daylight upfront with these lights. They are very impressive and the hardware is top notch -- aiming, setup, vibration isolation are all top of the line.

Here is a shot of the stock low beams LED

Here is a shot of the stock low beams LED with the Mopar 7 inch off-road lights.

Great example pics. Thanks for posting those!

 

[fuelcell1]

Installed a Tazer Mini in my PUNK’N Gladiator

What features of the Taser Mini were you most interested in?

 

[Bobh62000]

Installed new seat cover.

 

[ShadowsPapa]

Those fit and look nice!

 

[rafaelsmith]

Installed new seat cover.

Very nice. I will be getting Bartacts for mine as well. Black with Orange insert to match the Punk'n

Did you get the rear?

 

[Ldavila64]

Dropping off the Gladiator for 2" Lift, stabilizer, Fuel Rims,35" Nitto's & AMP XL rail guard auto step.

 

[rvillano8188]

Installed a badgeglow earlier this week, put a little Christmas on it, and then I got

my decal from Pixeldecals

 

[Whiplash2130]

What features of the Taser Mini were you most interested in?

Tire calibration, but there’s a whole lot more included.

 

[TRI-JAB]

Got the front windows tinted

Got my tail gate wrapped at SunStoppers - Rock Hill

Got my spare grill wrapped at SunStoppers - Rock Hill. I partially put it back together. Need to take the center panel out of my JT to mount the Trail Cam. Something for tomorrow when it is not raining....

 

[steffen707]

WINTER.......... DRAWERS are coming!

Actually while helping me load the plywood, the Menards employee pressed down on my fire extinguisher, whose pin fell out weeks ago..... Knew I should have replaced that.

Drawers are coming soon though.

Sponsored