What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[morejeepsthanicancount]

Mounted Rotopax on the factory trail rail.

I used the Rotopax Toyota/Nissan adapter - https://rotopax.com/toyota-nissan-truck-plate.html

I'm using the deluxe Rotopax Mount mounted vertical to the plate.

Absolutely perfect fit - and very secure.

Only issue was the bolt that came with it was overly long. I picked up a correct sized bolt (which also was better as it was matching black) at Lowe's …. 5/16-18 x 1 Cap Screw (in the drawer section)

The Rotopax is the 2 gallon which fits perfectly. Will not interfere at all with my Tonneau Cover as well below the top edge of the bed - fairly flush with top of the rail.

I plan on doing this exact can and mount. Besides the bolt, did you have to buy anything else, or does the handle come with the mount?

Sponsored

 

[cbl1]

You have to buy the bed mount separate from the Rotopax mount handle (I got the deluxe version which allows a little more precise tightening.

So what you see is really 4 products

- the Bed mount I linked, https://rotopax.com/toyota-nissan-truck-plate.html

-the Rotopax mount handle attached to it https://rotopax.com/dlx-pack-mount.html?category_id=7

-the Rotopax 2 gallon container,

-and the Lowe's shorter bolt (5/16-18 x 1 Cap Screw) which was like 99cents.

 

[cbl1]

Not technically my JT but setup jeep tent behind it in yard today.

 

[TheHops]

Not technically my JL but setup jeep tent behind it in yard today.

Looks like paradise!

I may actually be in the market for a solid ground tent myself to take along on trips, while I wait to see what type of product Ursa Minor is going to be putting out.

P.S. The lawn looks great. Those are some grass goals right there.

 

[Rottwheeler]

Not today, but this last weekend, installed a Mopar 2in lift and 37" MT/Rs on 17x9.5 Raceline Monster bead locks.

 

[Veloruche]

Just got my Black Rhino Arsenals on. They are 17s with a +30 mm backspacing and tuck under the fenders well. Wrapped in Kenda Klever 35x10.5r17. Also got my 3 piece bumper installed.

Looks great, I like the tires tucked under the fender flares myself.

 

[uplandgunner]

Finally got them installed
New wheels and tires. Pro-Comp 7069's and Falken Wildpeak MT-01 35 x 12.50 R-17

before

After

 

[Veloruche]

I added a Warn medium bull bar.

 

[bastage]

Added the RR Armis tri fold soft tonneau cover. Installation was about 20 minutes (would of aprobably been less then 15 if the factory diddnt get bedliner in the bolt holes on the bed) & looks great. One thing I will probably change is the toggles to hold the cab end in. Will change them out to a nylon lock nut & use a ratcheting wrench instead of the hand toggles in the future. Will just flat out be faster & easier & I will toss the appropriate size in the tool box inside.

 

[DirtyD]

New shoes 35" ko2s and Rubicon Express lift
My first jeep and I'm in love .Must buy more parts!

Which RE kit did you go with? Looks great!

 

[Gregj]

Did what Jeep should have done in the first place!

Gregj

 

[Veloruche]

Did what Jeep should have done in the first place!

Gregj

Love that, plan to do the same on my Gobi.

 

[ron168]

You have to buy the bed mount separate from the Rotopax mount handle (I got the deluxe version which allows a little more precise tightening.

So what you see is really 4 products

- the Bed mount I linked, https://rotopax.com/toyota-nissan-truck-plate.html

-the Rotopax mount handle attached to it https://rotopax.com/dlx-pack-mount.html?category_id=7

-the Rotopax 2 gallon container,

-and the Lowe's shorter bolt (5/16-18 x 1 Cap Screw) which was like 99cents.

The Fuelpax comes with the mount right now from their site. Besides the manufacturing process and warranty, any idea what the other differences between Fuelpax and Rotopax are? Why one over the other?

 

[sass JT]

Also me...

dammit...... just ordered more parts.... I unfortunately have an addiction.

 

[DrJ]

Just got my Black Rhino Arsenals on. They are 17s with a +30 mm backspacing and tuck under the fenders well. Wrapped in Kenda Klever 35x10.5r17. Also got my 3 piece bumper installed.

Looks good! What suspension you running? still stock?

Sponsored