What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[LoJac963]

Installed the Teraflex 1.5" level kit on top of my Mopar lift. I can't believe how much better it looks. Mine had a huge rake given the heavy smittybilt bumper and 12k winch.

Sponsored

 

[TRI-JAB]

I had to use both the yellow and red (as well as ground). I tried each one individually, but the camera didn't power on until I tied both together. I only wanted it to power on with the ignition, but both wires needed power with the ignition on. So far, I haven't had any issues with it. I didn't use the fuse taps. I used the Quadratec harness, which already had a 10 amp fuse in the harness. If you're looking to keep power to the camera all the time, you will have to find a separate 12 volt source (like battery) and will need a fuse (like the fuse tabs in your diagram) for protection. Here's what it looks like behind the glove box:

Hope this helps. Let me know if you have any questions.

Thanks!

 

[Jimmij]

Picked up my 2021 Max Tow Gladiator on Thursday night so spent today doing sill guards, led headlightbulbs and fogs, tonneau cover and dog hammock...also a beautiful day so top and doors had to come off...

what dog hammock is that?

 

[Sportsbiz]

Installed "locking" hood latches.

 

[JeepTrucker]

Installed "locking" hood latches.

What do you think of them so far?

 

[Sportsbiz]

What do you think of them so far?

I really like them. No hood flutter (not that I ever had any), and these were far easier to install then the Amazon reviews let on. Only tip for installation is to either have a ball end or stubby allen wrench handy.

 

[JeepTrucker]

I really like them. No hood flutter (not that I ever had any), and these were far easier to install then the Amazon reviews let on. Only tip for installation is to either have a ball end or stubby allen wrench handy.

Thanks. They are on my to do list as well. I just don’t like the fact that any a-hole can pop my hood and have at it. What brand did you get? I was looking at these:

they are DV8 and are $118 on Amazon

 

[DHP]

Installed my take on onboard air. Modified a Smittybilt pump since I had it with an ARB digital inflator and quick connect hose. Took off a lot of the pieces of the Smittybilt that made it portable including the handle, guard, and repurposed parts of the base. Fashioned a mount and hose hanger out of aluminum stock. Also drilled thru the bed and mounted a quick connect 12V plug for future accessories.

Doing this again from the start I’d go with an ARB pump but this one works out well and I already had it. It was extra work to replace the hose due to Smittybilt using non-standard fittings. Had to tap out the manifold on the pump to fit a 1/4 NPT fitting. After some tense moments I was able to make it work. Happy with how it turned out.

 

[Len]

Installed my take on onboard air. Modified a Smittybilt pump since I had it with an ARB digital inflator and quick connect hose. Took off a lot of the pieces of the Smittybilt that made it portable including the handle, guard, and repurposed parts of the base. Fashioned a mount and hose hanger out of aluminum stock. Also drilled thru the bed and mounted a quick connect olug for future mods.

Doing this again from the start I’d go with an ARB pump but this one works out well and I already had it. It was extra work to replace the hose due to Smittybilt using non-standard fittings. Had to tap out the manifold on the pump to fit a 1/4 NPT fitting. After some tense moments I was able to make it work. Happy with how it turned out.

View attachment 103206

That's actually pretty slick! Nice work.

 

[Sportsbiz]

Thanks. They are on my to do list as well. I just don’t like the fact that any a-hole can pop my hood and have at it. What brand did you get? I was looking at these:

they are DV8 and are $118 on Amazon

I went with a more budget friendly option

 

[JeepTrucker]

I went with a more budget friendly option

Thanks. I’d be interested in hearing how they are working out after a month or so

 

[Deleted member 30519]

Did my 5 tire rotation yesterday Trail Grapplers wearing very even.

What rack are using on the bed ? Is that a spare on it ? I've been waiting to see something like this. Excited for a reply

 

[PLEG1972]

Had a long day yesterday, new bumper, winch, fenders and front inner fenders

 

[BLK HOLE]

Added 3.5” front and 2.75” back. Stubby, winch and adjustable track bars, LEDs and a few other goodies.

Put 37s from the dealer.

 

[Wkyfiregladdy]

Installed my tazer jl mini and blacked out the trail rated badge

Sponsored