What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[usmc96]

Looks great. How’s the install on the armor?

You have to be very exact. It has 54 rivnuts to install. I used several clamps to ensure I got the holes drilled exactly were I needed them. I still had to drill out four of the holes on the armor a tiny bit to get the fitment just right.

Sponsored

 

[CWGrisw0ld]

Took 6 weeks, but my pixeldecals order finally arrived! As always, Don’s stuff is top notch.

 

[Deleted member 30519]

Took 6 weeks, but my pixeldecals order finally arrived! As always, Don’s stuff is top notch.

Love the step bars. I wish they had something like that when I first got my gladiator. I had to settle on the iron cross ones that look similar but a lot shorter.

 

[TheHops]

I haven't posted anything in this thread in a while, since I've been pretty active on my build thread, but I figured I'll share my most recent video of the Jeep, for anyone who is interested in overland-type builds.



Most recent additions:
-RSI SmartCap EVO
-Frontrunner roof rack
-iKamper RTT

 

[FLUndertaker]

You have to be very exact. It has 54 rivnuts to install. I used several clamps to ensure I got the holes drilled exactly were I needed them. I still had to drill out four of the holes on the armor a tiny bit to get the fitment just right.

Jeezus, that’s worse than I expected. Looks awesome but I have a tough time getting a half dozen holes to align. Better you than me my man.

 

[Alans17]

Getting into the holiday spirit! I used a wreath made to plug into a 12v cigarette lighter, but instead of running it into the cab, I installed a 12v plug under the hood and wired it to an aux switch. Now I can turn it on and off from the console. There’s probably an easier way, but this honestly wasn’t that hard.

 

[DLAW]

On our very first trip, I handed these to my wife to install while I drove. Took 10 seconds and wow, what a difference. I love the metal feel and they look like it was designed this way in the first place. Looks great with the Hydro blue! I highly recommend.

https://www.amazon.com/dp/B081LBM473

Bonus: I also installed a 8.4" screen protector on day 1. Peeled off the factory plastic, used a sticker to remove a couple dust particles and it went on so easily. You cannot see it's even there, but now I have full peace of mind. I'm not afraid to touch the screen and the surface have a very nice smart phone like feel to it.

https://www.amazon.com/dp/B07SC8VWNL

 

[brianinca]

Finally got around to installing the bumper Sunday, finished in the dark due to an unscheduled carbide burr purchase. Good fit after I removed all the superfluous brackets from the old skidplate. A friend wants to fill the holes with amber lights hooked to turn signals, we'll see. Have to put front license plate on somehow as well. @AllMoparParts.com is sending me the trim piece to finish it for now (Spring for a winch?).

 

[trust]

Is that the Ebay unit? Looks great!

 

[LancGladiatorGuy]

I had Time yesterday to install the Rebel Off-road XPlor full rack , everything was perfect fit & finish great hardware and instructions. Very stout build. I just used heavy tie-wraps to hold my traction boards until i get some mounts.

How much taller is it than the top? Or is it even?

 

[brianinca]

Yes, the $435+tax delivered one. Needed the OEM skidplate, the part is the JLR's in fact.

I have MANY nuts and bolts left over, and I'll pull it apart when I finally get a winch and install the included HEAVY winch plate, but I'm VERY pleased with the result. No directions but just figure you'll pull your old wiring harness and use a few zip ties.

Is that the Ebay unit? Looks great!

 

[trust]

Yes, the $435+tax delivered one. Needed the OEM skidplate, the part is the JLR's in fact.

I have MANY nuts and bolts left over, and I'll pull it apart when I finally get a winch and install the included HEAVY winch plate, but I'm VERY pleased with the result. No directions but just figure you'll pull your old wiring harness and use a few zip ties.

Great!! Thanks

 

[SPACEMAN5000]

hay EP,
I like this idea are you still using it, did it age well?

Can't speak on behalf of OP, but I did it right after getting my jt and its been great! Zero issues whatsoever

 

[Timdog]

View attachment 118093

Installed the Rugged Ridge elite antenna base and 6” inch stubby antenna. No more getting whipped around in the car wash!

How is the reception?

 

[Timdog]

On our very first trip, I handed these to my wife to install while I drove. Took 10 seconds and wow, what a difference. I love the metal feel and they look like it was designed this way in the first place. Looks great with the Hydro blue! I highly recommend.

https://www.amazon.com/dp/B081LBM473

Bonus: I also installed a 8.4" screen protector on day 1. Peeled off the factory plastic, used a sticker to remove a couple dust particles and it went on so easily. You cannot see it's even there, but now I have full peace of mind. I'm not afraid to touch the screen and the surface have a very nice smart phone like feel to it.

https://www.amazon.com/dp/B07SC8VWNL

Did you get the ring for the light switch?

Sponsored