What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[dawghauler]

installed a bodyguard rear bumper coated with raptor liner. side wings connect to the frame. seems to be a heavy weight bumper.

Sponsored

 

[TroutFishingInAmerica]

 

[Oak4627]

Where did you order the threaded eyebolts and do you have a part #. That is great idea over a diy trail rail system.

 

[PLEG1972]

I find your avatar creepy AF

Your welcome, I try!

 

[DAVECS1]

Tapped into my rear ARB air line (in/under the rear bumper) with a valve to supply my Air Lift rear airbags. Used a TPMS kit meant for a motorcycle to monitor the pressure in the bags. Will see how it works once the bed is loaded and bags are aired up to higher psi.

This is next level kick ass!

 

[IamAlan]

Installed the Amp Research Bed Xtender.

 

[Troybilt]

Worked on my skid plate hitch. This is a project that i have been very slowly working on in my free time. I hope to button it up by the end of the week but I thought that last week.

Going to slide the square tubbing in and bolt it to an excising hole on the back of the hitch to hold it in place. That way there is no chance of bending the bottom plate.

Good coat of primmer. Maybe paint tomorrow.

 

[PLEG1972]

Added a set of auxbeam sideshooters...yellow flashers on the sides

 

[PLEG1972]

So this is an I. Going to do but I need your help! I have a set of the Gatekeeper Knuckle Light Pot Mounts but can figure out what the torque specs are for them. I have the mounts and some pods. Can anyone help me out on how to figure it out?

 

[GaJT]

New wheels today.

 

[trust]

Worked on my skid plate hitch. This is a project that i have been very slowly working on in my free time. I hope to button it up by the end of the week but I thought that last week.

Going to slide the square tubbing in and bolt it to an excising hole on the back of the hitch to hold it in place. That way there is no chance of bending the bottom plate.

Good coat of primmer. Maybe paint tomorrow.

Nice Troybilt, I made one after my initial trip out in mine. Clearly neccessary.... I think I need to gusset the wings, well see

 

[Troybilt]

Nice Troybilt, I made one after my initial trip out in mine. Clearly neccessary.... I think I need to gusset the wings, well see

Looks nice and beef. I bet yours didn't take a month

 

[Atomicat]

Finally, new rims and tires. Only took a year!

 

[Atomicat]

Try it again. A little clearer

[/QUOTE]

 

[Binford]

i got my G regeared to 4.56 and installed the tuffy security insert

Sponsored