Any of you have this paper in your Gladitor?

[GladiatorG8R]

It lists Class II receiver hitch which mine did not come with.

Sponsored

 

[Moe_Fugga]

Unless you have a Class 3 receiver upgrade you have a Class 2. It is under the rear bumper.

 

[GladiatorG8R]

Unless you have a Class 3 receiver upgrade you have a Class 2. It is under the rear bumper.

I do not have a receiver hitch.

 

[Undecided]

that almost looks like instructions/requirements for shipping. May have just been left in the truck by accident.

 

[GladiatorG8R]

I wanted my truck to come with a receiver but it did not. All gladiators should come from factory with the receiver. You should not have to buy that separate.

 

[Moe_Fugga]

I do not have a receiver hitch.

Check again. Unless you bought used and it was taken off it is standard equipment.

 

[GladiatorG8R]

See my pic above. The receiver which receives the ball.

 

[Kevin_D]

Check again. Unless you bought used and it was taken off it is standard equipment.

That’s not a hitch receiver, that’s a place to put a ball hitch.
You have to drill a hole through the bumper plastics.

Kevin

 

[Terry]

It lists Class II receiver hitch which mine did not come with.

Nope

 

[GladiatorG8R]

Nope what?

 

[Ogre_FL]

That’s not a hitch receiver, that’s a place to put a ball hitch.
You have to drill a hole through the bumper plastics.

Kevin

I think the term "receiver" is a simple misnomer here.
That paper appears to be a shipping document and its simply saying there is a class II hitch (which I think is what bumper hitches are considered)

If it actually had the Mopar receiver hitch it would be a Class IV.

FWIW I don't believe a Class II "receiver" hitch even exist for our trucks as it would be a 1-1/4" receiver.

 

[Mr._Bill]

I wanted my truck to come with a receiver but it did not. All gladiators should come from factory with the receiver. You should not have to buy that separate.

The receiver is part of the Tow Package. If you want it to come with a receiver, you have to pay for it. If you get the factory installed Tow Package, it also includes an upgraded alternator and cooling fan.

 

[Dqban]

Mine came with with a tow receiver But I do not have any upgraded to package.

 

[Moe_Fugga]

That’s not a hitch receiver, that’s a place to put a ball hitch.
You have to drill a hole through the bumper plastics.

Kevin

You can tow a trailer with it......If you want to install a “hitch receiver” you have to uninstall this piece that is in its place that does the same thing it does. Call it what you will.

 

[Moab]

It lists Class II receiver hitch which mine did not come with.

That looks like it’s meant for the transport company personnel. Drivers and or yard peeps. Securing to the carriers.

Sponsored