What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[DocMike]

Not bad so far. I used the Tazer to reflash for 35s. I will wheel it this week. Then decide if I need to regear right away. I did get 20.2 mpg round trip from Co Springs to Marble with some wheeling and back. I ran up Independence Pass on 33s. That was 13 hours round trip of up and down passes and mountain driving. Pics so it did happen. The 35s don't feel too bad. But wheeling and a few tanks of gas will let me know for sure. I intentionally went with a narrow 35. 11.5 over the 12.5+
I had 295/70/17s on there before.

I hate to sound like a Tazer Fan Boy....but it was nice to jump in the Jeep and just swap the tire size right @Discount Tire and then drive off.

35's? How is it with 3.73?

Sponsored

 

[Munkey Boy]

35s and a 2.5" levelling kit.

Had to throw the top on too, expecting rain. Actually like the top on it. At least I'm telling myself that because it was a pain in the ass and I don't want to take it off only to have to go through fishing straps between the windshield and roll bar and back under the plastic covers again.

 

[awraynor]

Hi. I'm Mike. And I have a problem. 0ne year ago I had 33s installed. Today....well....
See the before and after.

You just keep making it better. Gobi #FTW

 

[DocMike]

Thank you. When the guy driving this is checking out your Jeep, you know you are doing something right,

You just keep making it better. Gobi #FTW

 

[redfish]

Which tire did you go with?

QUOTE="DocMike, post: 736613, member: 30669"]
Not bad so far. I used the Tazer to reflash for 35s. I will wheel it this week. Then decide if I need to regear right away. I did get 20.2 mpg round trip from Co Springs to Marble with some wheeling and back. I ran up Independence Pass on 33s. That was 13 hours round trip of up and down passes and mountain driving. Pics so it did happen. The 35s don't feel too bad. But wheeling and a few tanks of gas will let me know for sure. I intentionally went with a narrow 35. 11.5 over the 12.5+
I had 295/70/17s on there before.

I hate to sound like a Tazer Fan Boy....but it was nice to jump in the Jeep and just swap the tire size right @Discount Tire and then drive off.

[/QUOTE]

 

[DocMike]

Nitto Trail Grappler m/t 35/11.5/17

Which tire did you go with?

QUOTE="DocMike, post: 736613, member: 30669"]
Not bad so far. I used the Tazer to reflash for 35s. I will wheel it this week. Then decide if I need to regear right away. I did get 20.2 mpg round trip from Co Springs to Marble with some wheeling and back. I ran up Independence Pass on 33s. That was 13 hours round trip of up and down passes and mountain driving. Pics so it did happen. The 35s don't feel too bad. But wheeling and a few tanks of gas will let me know for sure. I intentionally went with a narrow 35. 11.5 over the 12.5+
I had 295/70/17s on there before.

I hate to sound like a Tazer Fan Boy....but it was nice to jump in the Jeep and just swap the tire size right @Discount Tire and then drive off.

[/QUOTE]

 

[rballman]

Got the shovel/axe mounted up in the bed...

Since I have been lurking on this board, it has given me a ton of ideas and cost me a ton of money. A huge thanks to all for the awesome ideas!

is that a painted 2x4?

 

[O-Face]

is that a painted 2x4?

It is. I made the board so that I had somewhere to stash a rifle while I'm at a match. So far, it has worked pretty good. The distance to the tailgate works to hold the large MTM ammo crate boxes pretty snug. Throw a couple of boxes with my gear in them and stuff the rifle in the clamps... call it a day.

 

[RobbertCole]

Got a rear bumper fabricated for more clearance. Ill be trimming the body line more and adding some skid protection to the sides as well. Got tired of seeing the same stuff on the market and not enough slim or low profile bumpers out there.

I really like the bumper but I would think the ends of the bed sliders would fold like paper and contact the bed corner if you ever impacted them without any reinforcement where the now empty bolt holes are.

 

[Oznative]

New here first post. Added the Alien grabs front and back, Passenger dash grab tray, Still researching where I want to spend my money on mods.

 

[jac04]

I thought the factory paint on the axle housings was horrible, so I did a little painting ...

... I got carried away and painted the rear control arms and the exposed areas of the frame in the rear as well ...

 

[DocMike]

Better angle on these 35s. I like them at 11.5

 

[Red Hot Sloth]

Field repairs on my skids. The scratches and rust don’t look good on my baby girl. ?

Are those Ace Sliders? The powder coating on mine is pretty weak, rusting, I think Im gonna sand, treat and bedline them.

 

[am1978]

My line-x got done today. I called on 5/12, four days after ordering my JTR, got on a waiting list due to supply chain issues. Installer told me it would be 3-5 weeks, called last Friday and set an appointment. Premium coat.

 

[Jerhemi]

Better angle on these 35s. I like them at 11.5

I ran the trail grapplers on my Ram, loved em! nice heep

Sponsored