What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Rubiwoo]

Finished the suspension lift and steering system upgrade today. Took her to the Oceano Dunes for a shake down run.

Sponsored

 

[FloridaJT6MT]

Installed Mopar trifold hard bed cover. Finished in the dark so pics come later. Heading to El Paso tomorrow so pics for “what did you do WITH your Gladiator “ are also soon to follow.

 

[Jason Oliver]

That looks great. Nice job. I’m in the process of doing something similar. Also inspired by the 4xe. Here is the interior photo. I’ll post some exterior shots when I think she’s ready.
Also have these wheels on order.

How do you like the B&M shifters? I've been wondering/lusting after those...

 

[Puch]

How do you like the B&M shifters? I've been wondering/lusting after those...

I like the shift handles a lot. They are totally cosmetic and don’t improve shifting, but I knew that when I bought them. I first used them on my Cherokee and I think it gives the interior a more “aggressive” look (for lack of a better description). If that’s your thing? Currently I have the blue covers on, but I have a few different colors that I bought and one set that I made from wood. That set looks very cool IMO.
Word of advice if you buy a set. They have two set screws. One is the alignment screw and one is the holding screw. If either isn’t tight enough, the shifter will loosen up and start to rotate. If you over tighten the alignment screw, you will unknowingly crush the top of the shift rod. It won’t come out of park. Been there done that! How I fixed it is a long story. Basically you will need a drill and small bit, needle nose pliers and a magnet to collect the metal shavings as you drill. You don’t want the shavings falling into the shifter mechanism. Yes, it was a lot of fun fixing that screw up. ?

 

[HVYMETL]

I got a rock chip and 4 spider cracks at 100 miles. Fing dump truck!

Dash cams pay for themselves sometimes... I use Thinkware in all my vehicles. They paid for themselves with just the laughs it brought me from idiots being them selves.

 

[HVYMETL]

@Bestop Sunrider installed, got tired of taking freedom panels off every day after work.

I see dead people...

 

[chrismeece74]

I see dead people...

Lol yeah Wife decorated her Wrangler for Halloween

 

[injaneer]

Plugged the drill holes from the front License plate that I did not need.

Wonder if I should drill out bottom two, so they match.....

 

[Montana_Wildcat]

Swapped out the soft top for my new-to-me (used) hardtop before the Montana winter hits. Very happy with the fit!

 

[ThatStinging_Jeep]

Finished the suspension lift and steering system upgrade today. Took her to the Oceano Dunes for a shake down run.

what sliders are those ?/

 

[polarisTXguy]

Brought it home! So let the games begin, the list is long and expensive

 

[Rubiwoo]

what sliders are those ?/

They are custom one offs I had made. No one had the features I wanted.

 

[MyRight]

I gave it a wash and got all of the bug splatter off of the grill.

 

[OnlyOne]

Added the 3/4” coil spacers to the rear. Was sitting too high in the front with the RC 2.5 spacers. Now it looks level. So easy. Found the dreaded RR axle seal leak. Cleaned it with Brakeclean and took out a bunch of that fiber fill that the vent had in it. Will check it going forward prior to a visit to the dealer.
Before 3/4” spacer

After

 

[Jc2112]

Added Warn Winch (Factory Steel Bumper)
Added JCR Off road Overhead MOLLE panel and wired and installed GMRS Radio.

Sponsored