What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[JTeco]

Installing some lights, made a bracket for the switchpros and changed the fob out

Sponsored

 

[Volksparts]

Installing some lights, made a bracket for the switchpros and changed the fob out

Oooh good work man. You have a cnc machine to make that bracket? Also what did you use to make the cowel cover for the DC designs cowel light. I'm running that light and love it.

 

[injaneer]

Can you put a link where you got that bed mat? Is it OEM or aftermarket?

https://www.amazon.com/dp/B0844VTBRY?psc=1&ref=ppx_yo2_dt_b_product_details

 

[JTeco]

Oooh good work man. You have a cnc machine to make that bracket? Also what did you use to make the cowel cover for the DC designs cowel light. I'm running that light and love it.

Yes, designed and made the bracket for the switch pros. The cowl cover is a KC light bar bracket with the Wilderness Recon Mod for the DC lights

 

[Volksparts]

Yes, designed and made the bracket for the switch pros. The cowl cover is a KC light bar bracket with the Wilderness Recon Mod for the DC lights

Looks like I might have to ditch my bullet point mount system for the jpam mount. Running that mount on my taco for 3 years now and love the sturdiness if them.

 

[ChillxPoint]

https://www.amazon.com/dp/B0844VTBRY?psc=1&ref=ppx_yo2_dt_b_product_details

Thank you. Is it pretty good so things dont slip back there? I had a oem tacoma rubber mat and that worked well on my tacoma.

 

[Ar4130]

Did you have to fully collapse the front LCA’s for them to fit?

The brackets are designed to work with stock length control arms. If you run adjustable arms, they should be adjusted to stock length.

 

[Gren71]

Did you have to fully collapse the front LCA’s for them to fit?

I have the MPP front LCAs and the brackets i got had two holes. One for 2.5in of lift and one for 3 or 3.5”. I used the holes for 2.5” of lift…that combined with the slightly longer MPP LCAs made for a huge steering improvement

 

[NoDoorsNoProblem]

Cold Windy day in NC but still managed to install a pair of CMM mirror mounts shortly after delivery in preparation for doors off season.

These are great. I have them mounted on the lower spot on the handles for a more OEM mirror positioning. Definitely not the same as full mirrors in terms of field of view but very nice for running doors off. No rattling or shaking whatsoever.

 

[TheTrailGeek]

Worked on hiding the wire to my phone. Just have to figure out the best way to get the wire into the center console now.

 

[injaneer]

Thank you. Is it pretty good so things dont slip back there? I had a oem tacoma rubber mat and that worked well on my tacoma.

I have heard that. Have not had anything in the back yet witit, so cannot confirm

 

[BeachBuggy]

These are great. I have them mounted on the lower spot on the handles for a more OEM mirror positioning. Definitely not the same as full mirrors in terms of field of view but very nice for running doors off. No rattling or shaking whatsoever.

Once the weather is good enough to take the doors off I will definitely try the lower spot to see which I like better. Thanks for the info!

 

[disenhower]

My Mopar badge finally came in. Got it installed. Have a Clayton 2.5” overland lift coming in sometime.
I also got this hitch cover.

Where did you order the Mopar Gladiator badge from?

 

[TexasLEO]

Where did you order the Mopar Gladiator badge from?

eBay. Searched part number at the top of the picture. # 68506274AC

 

[disenhower]

eBay. Searched part number at the top of the picture. # 68506274AC

Thank you!!!!!!

Sponsored