RodRecket
Well-Known Member
- Thread starter
- #136
The control arm brand (bend), wheel offset, backspace, width of wheel, and width of tire will all factor into whether the tire will rub. My combo 38x13.5 tire, 17x8.5 wheel (+25mm offset, 5.7" backspace) and MC control arms just touch the control arm at full lock/stuff while aired down to ~ 9psi. I do not feel or hear it but I have noticed about 2 inches of wear on the finish of the front lower control arms.Do you have issues rubbing the control arms with 8.5 wheels. I am running 9 inch Dirty Life
Sponsored