calipoontappa
Well-Known Member
- First Name
- Mike
- Joined
- Sep 30, 2020
- Threads
- 35
- Messages
- 612
- Reaction score
- 621
- Location
- San Francisco
- Vehicle(s)
- Jeep
just mounting.I assume you're just mounting to check to looks? No way you're going through all the wiring pain as well. It this is correct, you'll be missing one of the most important parts - how do you like the "steps". Also, with the Amps, you likely won't be able to install the step itself without power as the motors are in different positions and don't retract until power is applied. In any case, be care not to install the steps until they've retracted or it can bend the step. This bit of wisdom was left out of the instructions - found it out when calling Amp about another issue.
Good luck in your decision - either choice is likely to be great!
I already have the AMP installed, the step is HUGE lol the motors go in independently they are not in so I can manually push the step up or pull it down. It looks better in my opinion than the RSE. The RSE in person looks like the side of a boat BUT I dropped an AMP step from 6 inches off the ground and landed on a bolt and now it’s dented. I can’t imagine going on any trail with these. They look much better than RSE in my opinion but they are purely a fancy step nothing more.
Sponsored