Sponsored

Gladiators on Mopar 2" Lift Kit

MrKnowitall

Well-Known Member
First Name
Guenther
Joined
Oct 4, 2018
Threads
0
Messages
471
Reaction score
348
Location
Detroit
Vehicle(s)
14 JKU-R
Do you know if these are factory wheels....7.5" wide? They look great. Wondering if stock sport s rims (same 7.5" width) will hold a 35 with the mopar lift and still be funtional when articulating. Different backspacing/offset?
So if you get a lift kit, you have to also get a leveling kit? Why doesn't the lift kit have a leveling kit incorporated?
In case you want to put something (plywood, anyone?) in the bed and not look all sad and saggy.
Sponsored

 
Last edited:

RedTRex

Well-Known Member
First Name
Rick
Joined
Aug 25, 2017
Threads
14
Messages
1,994
Reaction score
1,521
Location
Chesapeake, VA
Vehicle(s)
2024 JT
Do we know for sure whether or not there's rub with the Mopar lift, 37s, and disconnected sway bar?

The JL could almost handle it. I imagine the JT would have a little more space ... at least in the rear wheel wells.
Based on knowledge/experience, don't think that Jeep with 37s would be free of rub in the front if FSB is unlocked
 

steffen707

Well-Known Member
Joined
Jan 28, 2018
Threads
204
Messages
8,624
Reaction score
8,940
Location
Middle Wisconsin
Vehicle(s)
2001 Jetta TDI RIP, 89' Civic SI, 2019 Pacifica Hybrid, 2020 GLADIATOR SPORT S "GLADYS"
In case you want to put something in the bed and not look all sad and saggy.
but why does lifting the jeep not lift the front and rear equally? are they just not designed to do this?
 

MrKnowitall

Well-Known Member
First Name
Guenther
Joined
Oct 4, 2018
Threads
0
Messages
471
Reaction score
348
Location
Detroit
Vehicle(s)
14 JKU-R
but why does lifting the jeep not lift the front and rear equally? are they just not designed to do this?
It DOES lift the front and rear equally. Pickups are usually designed to sit slightly high in the rear without a load, so that they’ll be level with a moderate one. Many light duty lifts raise the rear slightly less than the front to achieve a level apearance empty.
 

JP1

Well-Known Member
First Name
John
Joined
Mar 29, 2019
Threads
13
Messages
1,506
Reaction score
2,885
Location
Fort Lauderdale, FL
Vehicle(s)
2024 JLU Rubicon 4xe
Build Thread
Link
Ok, I found that they are black rhino wheels. What size tires?

Can anyone tell me what backspacing I’ll need with the Mopar lift and 37’s to make sure there is no rub?

Finally, will I also need new trackbars to put everything back to factory specs?

Please
I couldn't figure out why the tires sidewall looked so small, should have known.
Per EAW:
"2'' LIFT, 35'' NITTO RIDGE GRAPPLERS, 20'' BLACK RHINO HARD ALLOYS"
A close up pic on their site shows these as 35x12.5r20
https://eawcars.net/2020-Jeep-Gladiator/Used-PickupTruck/Pelham-AL/12723124/Details.aspx

Glad my Black Rhino's are 17s.:like:
Got ya bro. :like:
 
Last edited:

Sponsored

steveale

Well-Known Member
Joined
Jan 17, 2019
Threads
24
Messages
381
Reaction score
726
Location
Georgia usa
Vehicle(s)
1951 M38, 2020 Gladiator LE
I went over to Palmer Jeep in Roswell Ga yesterday since it’s right down the street from my office. David from sales met me in the lot in customary fashion. I told him I was looking for the gladiator that arrived the day before and was getting the lift and 37’s. He found out it was in the service bays getting finished and escorted me back. AWESOME! I arrived and there she was sitting on the new rubber. The tech spent some time telling me all about it. He’ done hundreds of Jeep lifts over the last few years (relitivy young guy). He said the kit was very good quality and straight forward. With the 37”s he said in off-road flex you would want the bumper wings removed. They also cut about 1” off the rock rail. I think if you had 35’s on the lift no mods or bumper removal. I wonder if 35’s without the lift might also need the clearance mods to accommodate off road flex. Also the tires were 13.5 so a little beefier stance. Looks really good.

Specs:

37x13.50x22 Nitto Ridge Grapplers
22x12 -44 Hostile Rage
Mopar 2" Lift kit

Jeep Gladiator Gladiators on Mopar 2" Lift Kit B0B5B457-0DB8-43B0-BCA1-8C2264E7360C


Jeep Gladiator Gladiators on Mopar 2" Lift Kit 691FC9E5-FE8E-420C-801F-E27A8F94DC2F


Jeep Gladiator Gladiators on Mopar 2" Lift Kit 39366AC6-1B05-4426-B48C-997929E68E65


Jeep Gladiator Gladiators on Mopar 2" Lift Kit C79762E3-D639-489B-BCA7-E5567FAD9380


Jeep Gladiator Gladiators on Mopar 2" Lift Kit FFF0CEC7-0FB6-47FD-BEEE-4E41C727526D


Jeep Gladiator Gladiators on Mopar 2" Lift Kit 422D48D4-87FE-48B7-B6D0-ADD871790E8C


Jeep Gladiator Gladiators on Mopar 2" Lift Kit 947D9DD8-10DA-4597-B8D8-289D6E102D33


Jeep Gladiator Gladiators on Mopar 2" Lift Kit D86B0654-4D3C-487E-87FD-050055AB19FE
 
Last edited by a moderator:

lucky7t

Well-Known Member
Joined
Apr 8, 2019
Threads
8
Messages
199
Reaction score
265
Location
Oklahoma
Vehicle(s)
17 JK Rubicon 4dr, 15 JK Sport 4dr
The pics are great . Anyway to specify what lift if any and what size wheels and tires with offset ?
 

steffen707

Well-Known Member
Joined
Jan 28, 2018
Threads
204
Messages
8,624
Reaction score
8,940
Location
Middle Wisconsin
Vehicle(s)
2001 Jetta TDI RIP, 89' Civic SI, 2019 Pacifica Hybrid, 2020 GLADIATOR SPORT S "GLADYS"
I went over to Palmer Jeep in Roswell Ga yesterday since it’s right down the street from my office. David from sales met me in the lot in customary fashion. I told him I was looking for the gladiator that arrived the day before and was getting the lift and 37’s. He found out it was in the service bays getting finished and escorted me back. AWESOME! I arrived and there she was sitting on the new rubber. The tech spent some time telling me all about it. He’ done hundreds of Jeep lifts over the last few years (relitivy young guy). He said the kit was very good quality and straight forward. With the 37”s he said in off-road flex you would want the bumper wings removed. They also cut about 1” off the rock rail. I think if you had 35’s on the lift no mods or bumper removal. I wonder if 35’s without the lift might also need the clearance mods to accommodate off road flex. Also the tires were 13.5 so a little beefier stance. Looks really good.

Specs:

37x13.50x22 Nitto Ridge Grapplers
22x12 -44 Hostile Rage
Mopar 2" Lift kit

B0B5B457-0DB8-43B0-BCA1-8C2264E7360C.webp


691FC9E5-FE8E-420C-801F-E27A8F94DC2F.webp


39366AC6-1B05-4426-B48C-997929E68E65.webp


C79762E3-D639-489B-BCA7-E5567FAD9380.webp


FFF0CEC7-0FB6-47FD-BEEE-4E41C727526D.webp


422D48D4-87FE-48B7-B6D0-ADD871790E8C.webp


947D9DD8-10DA-4597-B8D8-289D6E102D33.webp


D86B0654-4D3C-487E-87FD-050055AB19FE.webp
NICE! I would have liked to see it with 17" wheels though, but beggars can't be choosers.
 

Iron Wolfpack

Well-Known Member
First Name
Matthew
Joined
Mar 7, 2019
Threads
2
Messages
242
Reaction score
393
Location
Raleigh, NC
Vehicle(s)
2020 Red Rubicon Gladiator LE, 06 Range Rover Sport, 92 E350 Tailgating Bus (Howlin' Prowler); past Jeeps - 87 YJ, 02 TJ
These pictures were found on FB And the Jeep is at Westgate Jeep in Raleigh NC for 66k. It is 37 inch tires and a lift. I’m assuming Mopar since dealership added it.

Jeep Gladiator Gladiators on Mopar 2" Lift Kit 40AD2A66-3514-4A71-8D16-6707D74D42F6


Jeep Gladiator Gladiators on Mopar 2" Lift Kit 7D0071D5-6D8D-4338-994C-420DA1699E2B
 

Sponsored

NORDNDED

Well-Known Member
First Name
Steven
Joined
Apr 10, 2019
Threads
10
Messages
160
Reaction score
292
Location
Holly Springs, NC Durango, CO
Vehicle(s)
2020 JTR, 2016 JKUR, 2015 JKURHR, 2015 F150, 1973 Ford Bronco
I know it’s personal preference, but I don’t think the negative offset wheels (especially the -44) look good on the Gladiator...

I couldn't agree more. It reminds me of the lowered ricer 90's Honda civics with the low profile tires and wheels sticking way out of the fenders. Yeah, lets copy that on our Jeeps, don't forget the muffler to make it sound like a weed whacker too...
 

msujedi

Well-Known Member
First Name
Jed
Joined
Dec 14, 2018
Threads
3
Messages
237
Reaction score
299
Location
Michigan
Vehicle(s)
2020 JT Sport S, 2014 Durango, 2020 Ibis Ripley
Vehicle Showcase
1
I couldn't agree more. It reminds me of the lowered ricer 90's Honda civics with the low profile tires and wheels sticking way out of the fenders. Yeah, lets copy that on our Jeeps, don't forget the muffler to make it sound like a weed whacker too...
I agree that too wide of a stance looks gaudy. But, larger tires require a stance that's a bit wider to avoid rub and full turn. The key is finding that sweet spot that's just wide enough without going 'throwback 90's civic'.
 

NORDNDED

Well-Known Member
First Name
Steven
Joined
Apr 10, 2019
Threads
10
Messages
160
Reaction score
292
Location
Holly Springs, NC Durango, CO
Vehicle(s)
2020 JTR, 2016 JKUR, 2015 JKURHR, 2015 F150, 1973 Ford Bronco
These pictures were found on FB And the Jeep is at Westgate Jeep in Raleigh NC for 66k. It is 37 inch tires and a lift. I’m assuming Mopar since dealership added it.

40AD2A66-3514-4A71-8D16-6707D74D42F6.webp


7D0071D5-6D8D-4338-994C-420DA1699E2B.webp
This is the dealer I ordered my LE through and cannot get any updates after asking a few times.. maybe I should ask via Facebook?
Sponsored

 
 







Top