Lets see all those Gladiators with lifts and bigger tires!

[GladiatorCruzen]

Clayton Ride Right 2.5
Icon Rebound 17x8.5
Nitto Ridge Grapplers 37x12.5
Fox 2.0

Sponsored

 

[Reverser]

2020 Sport S
35 x 12.5" Open Range tires
17" Raceline Defenders
Readylift kit 4" front 3" rear.

 

[brain]

Mounted the Teraflex "Mojave Special" 2.5" lift and NITTO 37" (37X13.50R17) Ridge Grapplers (emphasizing 13.50 as opposed to 12.50 for extra burly). So, total lift is approaching the 4" mark (not accounting for tire size) due to the Mojave rolling off the line about 1" higher than a Rubicon.

 

[KHam]

Lift is Rock Krawler 3" Pro-X No Limits Stage 1, Nitto Trail Grapplers 37x12.50 on 17" XD 137 FMJs. Rockslide steps.

 

[Mules]

Lift is Rock Krawler 3" Pro-X No Limits Stage 1, Nitto Trail Grapplers 37x12.50 on 17" XD 137 FMJs. Rockslide steps.

Nice rig, and it's nice to show some 4 wheeling shots. How do you like the Diamond Back bed cover? Any installation or leaking issues?

 

[KHam]

Nice rig, and it's nice to show some 4 wheeling shots. How do you like the Diamond Back bed cover? Any installation or leaking issues?

Thanks. Love the diamondback. This is my 3rd one. I had one on my Raptor and one on my Diesel truck. It doesn't seem to seal quite as good on the Gladiator as it did on my other trucks. Mostly because the plastic liner on top the JT bed edge seems to compress with any load. But it's plenty good enough for me. I also have a bedrug in it so it's like a giant trunk back there. Mostly I get these (Diamondback HD version) so I have a place to mount my antennas, and the fact it has a deadbolt like lock mechanism. You would really have to work at it with a crowbar to get into it so I fee safe with whatever I put back there. Installation takes about 15 minutes and only requires a few adjustments. It's shipped fully assembled.

That cover is rated to haul more weight on top of it than the JT is rated to haul. I sometimes walk around on top of it when I need to get up high for taking pictures.

 

[Mules]

Thanks. Love the diamondback. This is my 3rd one. I had one on my Raptor and one on my Diesel truck. It doesn't seem to seal quite as good on the Gladiator as it did on my other trucks. Mostly because the plastic liner on top the JT bed edge seems to compress with any load. But it's plenty good enough for me. I also have a bedrug in it so it's like a giant trunk back there. Mostly I get these (Diamondback HD version) so I have a place to mount my antennas, and the fact it has a deadbolt like lock mechanism. You would really have to work at it with a crowbar to get into it so I fee safe with whatever I put back there. Installation takes about 15 minutes and only requires a few adjustments. It's shipped fully assembled.

That cover is rated to haul more weight on top of it than the JT is rated to haul. I sometimes walk around on top of it when I need to get up high for taking pictures.

Thanks for the recommendation. Call Diamond Back about the plastic compressing as they have a fix. They can send you shims to fill the gap under the side plastic parts. I heard about this issue in another forum, and it was an issue with other trucks.

 

[KurtP]

Clayton Ride Right 2.5
Icon Rebound 17x8.5
Nitto Ridge Grapplers 37x12.5
Fox 2.0

whats the offset spec in your wheels? How much “poke”?

 

[GladiatorCruzen]

whats the offset spec in your wheels? How much “poke”?

-6mm

 

[Punkn_Gladiator]

Rough Country 6" lift
Fuel Zephyer 17x9 wheels
Patriot MT 35x12.5x17 tires

How do you like the RC 6" kit? Ride good? Bad? Any issues? Etc..

 

[Danzigsdad]

2” Mopar
35s 35x12.50 Toyo AT
17x9 Quadratic Rubicon
Replaced the stock wheels, with these, yesterday. Pleased with the stance and overall look for a 150$ wheel.

 

[LiftedrubiconJT]

Mopar lift
35" x 12.5 Nitto Ridge Grapplers
20x10 xd brute wheels

 

[Golvach]

2021 Overland, 2" Mopar lift with fox shocks, adjustable track bar in the front, fox steering stablizer, synergy sector shaft brace, mopar performance 17in wheels with 35x12.5x17 Nitto Trail Grappler MTs. Regearing to 4:56 next week.
Couldn't be happier with the way it turned out (....thanks to the many people on this forum who helped me figure out what the heck I was doing).

 

[dangerousone]

Took the Gladiator after a few upgrades on a road trip to AZ and it rode amazing, even on a few trails north of Scottsdale.

2.5” EVO Enforcer Stage 2 Plus
Kept the Factory Fox Shocks for now with extensions
Teraflex Falcon Nexus EF 2.2 Steering Stabilizer
17” Bronze Dirty Life Race Wheels DT-1
37” Nitto Ridge Grapplers
Tazer Mini

 

[Tufelhundin]

2021 Overland, 2" Mopar lift with fox shocks, adjustable track bar in the front, fox steering stablizer, synergy sector shaft brace, mopar performance 17in wheels with 35x12.5x17 Nitto Trail Grappler MTs. Regearing to 4:56 next week.

Very nice! I have a almost the same setup...please make a separate thread with your thoughts concerning the 4.56.

Not sure how yours performs with the 3.73's for I see people say that they dont need rehearing no matter what size tire they go to and most are getting 5-6mpg per tank than I am....when I was stock and I tend to drive the speed limit I never got much better than 17mpg.

Really curious to know if you actually get to use 8th gear....at least a little. I haven't seen 8th gear since the day I added the 35's and lift. Plus, does your MPG change at all? Right now "winter", if I could break 15mpg it would be AWESOME, lol! Curious to hear what your rpms are at a given speed as well.

Im really wanting to regear mine, 4.56 are what Ive been considering.

Sponsored