bgenlvtex
Well-Known Member
- First Name
- Bruce
- Joined
- Jun 8, 2019
- Threads
- 11
- Messages
- 1,314
- Reaction score
- 1,971
- Location
- Texas/Alaska
- Vehicle(s)
- 2020 JTR
- Thread starter
- #1
I built and installed lighting and power ports in my ARE shell over the last several weeks.
I installed:
1x SAE 20a power port on the left front of the bed to power the electric transfer pump, for my auxiliary tank (not much to see there so no pic)
1x Cigarette lighter power port 20a in the cover panel for the factory supplied (but I did not get) 115v outlet
4x QC3.0 USB ports one with digital volt meter
Warm white LED strips on the ceiling center, and one each on the gull wing windows and rear window. All individually switched and on dimmers.
All circuits on fuses, master breaker at the battery, everything routed through braided p.e.t. expandable sheathing.
Here are some pics, if you have questions I'll be more specific
I installed:
1x SAE 20a power port on the left front of the bed to power the electric transfer pump, for my auxiliary tank (not much to see there so no pic)
1x Cigarette lighter power port 20a in the cover panel for the factory supplied (but I did not get) 115v outlet
4x QC3.0 USB ports one with digital volt meter
Warm white LED strips on the ceiling center, and one each on the gull wing windows and rear window. All individually switched and on dimmers.
All circuits on fuses, master breaker at the battery, everything routed through braided p.e.t. expandable sheathing.
Here are some pics, if you have questions I'll be more specific
Sponsored