What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Bekah]

Nice!!! I'm going up to Beasley Knob and Wind Rock this weekend. Hopefully I can knock out 3 badges!! Post Pics when you get your Badges...

Oh, wow...trail difficulty of 7-9...good luck! I'm still on the "bunny slopes", no where near ready for that level of challenge yet, regardless of the vehicle, just as a driver.

Was just looking at Beasley Knob online (forest service) and they're saying that trail is closed temporarily due to wet conditions. Hopefully it'll be opened again in time for you...and maybe you'll get some great mud in there!

Sponsored

 

[steffen707]

I added a T-Rex...

i bought one too. Need to install it.

 

[Ted Striker]

Badge Glow LED backlighting installed.

Info here: https://www.jeepgladiatorforum.com/...ow-trail-rated-badge-light.20907/#post-320862

 

[AJ-MJ]

Today I installed WeatherTech back seat floor mats. Thanks to those that posted that they were available. They match the front and fit great.

I also recently installed a cell phone holder. It is a combination of two products. The first is a JL / JT grab bar 20 mm ball mount from Carolina Metal Masters Offroad. CMM Offroad also has a 1” ball if you prefer the RAM mount products. The second part is a 67 Design, JL / Gladiator Mount Driver Edition Pack. The primary reason I decided to use this combination is that I prefer not having the cell phone blocking part of the windshield or view of the road. It is within an arm’s reach away and also close to the USB charging ports. Additionally, it has the flexibility to raise or lower the cell phone to one’s preference. You can also buy longer arms from 67 Design as well. All of the products are a bit expensive but really high quality.

https://www.carolinametalmasters.com/products/jl-grab-bar-ball-mount?_pos=2&_sid=1ff781a37&_ss=r

https://www.67d.com/collections/jl-...nt-driver-edition-pack?variant=19569564549223

 

[steffen707]

Today I installed WeatherTech back seat floor mats. Thanks to those that posted that they were available. They match the front and fit great.

I also recently installed a cell phone holder. It is a combination of two products. The first is a JL / JT grab bar 20 mm ball mount from Carolina Metal Masters Offroad. CMM Offroad also has a 1” ball if you prefer the RAM mount products. The second part is a 67 Design, JL / Gladiator Mount Driver Edition Pack. The primary reason I decided to use this combination is that I prefer not having the cell phone blocking part of the windshield or view of the road. It is within an arm’s reach away and also close to the USB charging ports. Additionally, it has the flexibility to raise or lower the cell phone to one’s preference. You can also buy longer arms from 67 Design as well. All of the products are a bit expensive but really high quality.

https://www.carolinametalmasters.com/products/jl-grab-bar-ball-mount?_pos=2&_sid=1ff781a37&_ss=r

https://www.67d.com/collections/jl-...nt-driver-edition-pack?variant=19569564549223

Dang, that's a good idea. maybe I shouldn't have gone with the dash mount one from 67D.....

 

[Digger70]

I saw on another thread about bedliner alternatives and someone suggested using a horse stall mat from somewhere like Tractor Supply. So I went today and got one that's 4x6 and about an inch thick or so for about $40. I used my reciprocating saw to cut it to fit. I'm going to trim the cutoff pieces so they fit on the open side to the left.

edit: added link to thread https://www.jeepgladiatorforum.com/forum/threads/proper-bed-mat-solution-for-those-in-need.19979/

 

[Texas_Gladiator]

I clicked the ling for the CAI and it says that it is not compatible with the JT. Is it the typical Amazon error and it in fact does work?

Yeah, I think so. AFE's website says it fits. Also the JK Gears and Gadgets YouTube channel guy installed one on his Gladiator and it sounds sick. I can't wait to get it put on.

https://afepower.com/afe-power-54-76217-momentum-gt-pro-5r-cold-air-intake-system

 

[Tourenwagen]

Acted as an emergency brake for an Audi A7

The marks on the rear bumper can probably be polished out. Her hood was bent in two places and the paint was chipped and the grille was cracked and pushed in. She claimed her foot slipped off the brake.

 

[JRSmith]

Need some internal storage space to stow the cover for the 2 top pieces. Added a lite weight shelf above the rear widow out to the large pre-drilled 3/8" holes in the roll cage(approx. 14" from rear of top. The rear of the shelf rests on top of the head rests and the front blots underneath the roll cage.. When I don't have the dogs in the back seat, Now problem for grand kids or shorter folks to sit w/o heating their heads..If a taller person is in back--only need to remove the two front bolts and out the shelf comes...This allows me to carry the cover for the tops etc. w/o taking up valuable space inside..

 

[Bobh62000]

Installed new rims

 

[Bekah]

Acted as an emergency brake for an Audi A7

The marks on the rear bumper can probably be polished out. Her hood was bent in two places and the paint was chipped and the grille was cracked and pushed in. She claimed her foot slipped off the brake.

Damn, that sucks..but glad it wasn't worse though

 

[Troybilt]

Acted as an emergency brake for an Audi A7

The marks on the rear bumper can probably be polished out. Her hood was bent in two places and the paint was chipped and the grille was cracked and pushed in. She claimed her foot slipped off the brake.

Looks totaled. Want to sell me some parts

Glad it wasn't to much damage for you. Good luck wit a quick fix.

 

[sodak]

Installed my Hood lift shocks .. Why these don't come stock is beyond me... no more stick.

 

[Tourenwagen]

Installed new rims

Those wheels are awesome, nice choice

Damn, that sucks..but glad it wasn't worse though

Thanks and yeah it could have been way worse. She took all the damage luckily.

Looks totaled. Want to sell me some parts
Glad it wasn't to much damage for you. Good luck wit a quick fix.

Installed my Hood lift shocks .. Why these don't come stock is beyond me... no more stick.

Do you have a part # or a link? Sounds like a no brainer mod.

 

[sodak]

Team Tech Offroad.
https://teamtechoffroad.com/collections/hood-struts

Sponsored