Pillar gauge mount

[Mikeytmc]

Looking at adding the banks gauge https://www.bankspower.com/i-2591-b...one-for-all-2008-obdii-can-bus-vehicles.html# , is there a pillar mount that would work with this gauge?

Sponsored

 

[Hootbro]

The factory built in grab handles kind of squash most of that. I was in the same boat awhile back and best I have found for JL/JT gauge pods is one for the top dash center tray area and it was a 3 hole gauge pod.

 

[kevman65]

As of now, I think the only A pillar pods are for JK's.

I did a search earlier in the year and that was all I came up with.

Somewhere on the JL side of the Board, someone modified a single pod to adapt to the A pillar after removing the driver side grab handle. I lucked upon it and have no idea where or how I found it.

 

[Mikeytmc]

Yeah that’s all I can seem to find is center mounts. Probably go that rout for now until I find something I like better

 

[Mikeytmc]

I have actually found a single gauge pod mount for the A pillar. It was designed for a JL. I’m fairly new to jeeps, could someone confirm if the JT is the same?

 

[Hootbro]

I have actually found a single gauge pod mount for the A pillar. It was designed for a JL. I’m fairly new to jeeps, could someone confirm if the JT is the same?

Got a link?

Should be the same between JL and JT.

 

[shrinkhead]

Thanks for the inspiration. I always liked the three gauge center pod on my 302 so was looking to add something similar to the JT and the EAG seems to do the trick. Is there also a branded MOPAR one? Can't find it but that may just be me

 

[Mikeytmc]

Here’s a link to the one I found.

https://www.ebay.com/i/402593537458...7LidqImaBb2y1P77f9ShKG_CwuLzXihYaAlGgEALw_wcB

 

[Gladiator_92]

I can't believe there isn't anything on the market for the JL/JT in regards to an integrated single, double or triple gauge pod mount that replaces a trim piece somewhere in the cab. The JL has been out for 3 years now. Everything I find looks sloppy or temporary.

 

[jc99]

Another option https://www.ebay.com/itm/284598136736?hash=item42435eefa0:g:pwMAAOSwEoth18M1

 

[Vtur]

You can make a custom mount similar to my wireless charger and it doesn't interfere with the visor operation. I have the Scangauge on top of rearview mirror.

 

[ArmyMP]

Here is a custom from a JL

https://www.jlwranglerforums.com/fo...roforce-52mm-pod-a-pillar-trim-removal.82197/

 

[staying_tuned]

AeroForce is legit. I ran a trio of their interceptors on a mustang and they were bulletproof. These are what you're seeing on ebay but if you prefer to buy directly (I do) here are links to both their single and dual pods.

Dual: https://aeroforcetech.com/products/...22-dual-gauge-pod?_pos=1&_sid=a554b076a&_ss=r

Single: https://aeroforcetech.com/products/...-single-gauge-pod?_pos=2&_sid=a554b076a&_ss=r

Lastly, there is a member or two running this with the Bank's 52mm gauge and it looks fantastic. You'll find it if you scroll around the derringer threads.

Sponsored