What made you need to weigh it?I weighed mine due to CA DMV requiring it with a 1/2 tank and no drivers weighed 4980#
Since I bought it out of state, this is what is required to register the truck in CAWhat made you need to weigh it?
MIne is fairly stock. 5000 lbs on the nose. 5180 lbs with my 180 lbs son in the passenger seat.Took some metal to the scrap yard today. 5660 lbs with me and my son and some junk they wouldn't take still in the bed.
I'm 270, my son is 170 and I'd guess the junk was about 50 lbs. Roughly 5100 lbs I'd say by itself.
I'll be finding out this week. Taking garage junk to the dump. Curious as to what my JT weighs.Took some metal to the scrap yard today. 5660 lbs with me and my son and some junk they wouldn't take still in the bed.
I'm 270, my son is 170 and I'd guess the junk was about 50 lbs. Roughly 5100 lbs I'd say by itself.
I've probably added about 175 lbs with my front bumper and winch aloneIt's all going to matter what accessories you have and what you've added to your vehicle.
When I got mine the registration said 4,913 tare, 6250 GVWR. My state also requires weighing before registration. I think they must have weighed it on E, before they filled it up for me. Mine is the same configuration as yours, but manual, and with the steel front bumper (so probably equaling a wash with the the lighter transmission but heavier bumper). I know Jeep lists the curb weight for mine at 5,050 lbs, but I think that's with a full tank.I weighted mine before the accessorizing began
It seems Jeep is pretty spot on with their published weight of 5050-5072 lbs for a Rubicon.
Configuration - 2021 Gladiator, Rubicon, V6 Pentastar, Auto, 3-piece Hardtop, stock (not 'steel') bumpers, full fuel (22gl @6.3lbs per, 138 lbs)
Weight (on certified scales) - 5040 lbs total, 2660 lbs- front axle (53%), rear axle 2380 lbs (47%)