The best possible ARB Pump Install location ever?

[Brfertig [HACKED ACCOUNT]]

This location meets many needs for Jeep Wrangler JL and Gladiator peoples.
Easy access
Height to Keep out water and mud
Cool location to keep within operating temps
FREE
FREE
Looks cool.

Sponsored

 

[Brfertig [HACKED ACCOUNT]]

@NektoInPhx

 

[NektoInPhx]

This is Brilliant! Saw the video, jumped off the couch, done in an hour with heat shrink wiring.

Internet Tip: Make sure you use keywords ( compressor, ARB, bracket, mount, on board air, etc ) in your original posts. I saw this randomly on YouTube, but it was not searchable on JeepGladiatorForum.com, when I came to give you mad props!

Thanks for spending all that time under your rig, so I didn't have to!

 

[Brfertig [HACKED ACCOUNT]]

This is Brilliant! Saw the video, jumped off the couch, done in an hour with heat shrink wiring.

Internet Tip: Make sure you use keywords ( compressor, ARB, bracket, mount, on board air, etc ) in your original posts. I saw this randomly on YouTube, but it was not searchable on JeepGladiatorForum.com, when I came to give you mad props!

Thanks for spending all that time under your rig, so I didn't have to!

That's why I do this. Love being innovative and helping others. In turn you are helping me get the word out. Glad you like it.

 

[LaterGator]

Very easy install in the best location.

I don't have air lockers, so if you use the arb wiring harness with the Aux switches, you only need to connect the small red wire to the Aux switch. The other wires are unused. I used switch 4. The fuse and relay is still in place to handle the high amp load.

 

[Brfertig [HACKED ACCOUNT]]

Very easy install in the best location.

I don't have air lockers, so if you use the arb wiring harness with the Aux switches, you only need to connect the small red wire to the Aux switch. The other wires are unused. I used switch 4. The fuse and relay is still in place to handle the high amp load.

Correct, you got it. The schematic is in there just use the red only. Blue is illumination, black is ground.

I did this instead however. Factory tight look.

 

[LaterGator]

This is my installation. Only used about 2 ft of the provided wiring harness to wire up to the Aux 4 switch.

 

[Brfertig [HACKED ACCOUNT]]

This is my installation. Only used about 2 ft of the provided wiring harness to wire up to the Aux 4 switch.

Nice work and too easy, right?

 

[LaterGator]

It is way less complicated than pulling the fender off to install the [Banned Site] ACM and associated plumbing. I have a [Banned Site] ACM mount for sale now.

 

[RojStock]

This location meets many needs for Jeep Wrangler JL and Gladiator peoples.
Easy access
Height to Keep out water and mud
Cool location to keep within operating temps
FREE
FREE
Looks cool.

That is pretty awesome.

Have you looked at adding a connector to something like the Rugged Ridge Snorkel attachment in the corner to be able to connect without opening the hood. Seems like there would be space there to integrate that and it's a short unobstructed throw to get there. Great Job, think I may be ordering soon.

Sort of like the Wayout concept but on the other side. (Keep the switch inside though. lol)

 

[BrandRezake]

This location meets many needs for Jeep Wrangler JL and Gladiator peoples.
Easy access
Height to Keep out water and mud
Cool location to keep within operating temps
FREE
FREE
Looks cool.

This is BRILIANT. Great job!

What are your thoughts of trying to fit a Twin in there?

 

[Brfertig [HACKED ACCOUNT]]

This is BRILIANT. Great job!

What are your thoughts of trying to fit a Twin in there?

Mm probably not. But hey you can make anything happen with enough imagination.

 

[LordEnzo]

That is pretty awesome.

Have you looked at adding a connector to something like the Rugged Ridge Snorkel attachment in the corner to be able to connect without opening the hood. Seems like there would be space there to integrate that and it's a short unobstructed throw to get there. Great Job, think I may be ordering soon.

Sort of like the Wayout concept but on the other side. (Keep the switch inside though. lol)

Any chance this concept piece is in production yet?

 

[andrew8404]

Good stuff thanks. Also, what did the lockers run you?

 

[Gatorized]

That is pretty awesome.

Have you looked at adding a connector to something like the Rugged Ridge Snorkel attachment in the corner to be able to connect without opening the hood. Seems like there would be space there to integrate that and it's a short unobstructed throw to get there. Great Job, think I may be ordering soon.

Sort of like the Wayout concept but on the other side. (Keep the switch inside though. lol)

My wish list would have Rugged Ridge make a cowling housing for the driver’s side to match the snorkel housing on the passenger side, but with the on board air contols inside as you suggest.

Sponsored