The Definitive Front Bumper Thread

[WILDHOBO]

It may work... The length looks like it would just barely go back far enough. Here's what the Mojave stock skid plate and reservoir looks like that I pulled from another post (My Mojave hasn't arrived yet). Also included a markup of your photo to where the shock reservoir would be. It appears the Warn skid may go back far enough, but it attaches differently. Your's appears to have a bracket from the inside that may interfere with the reservoir, I'll have to see if I can pull up the install instructions for Warn skip plate to see where is attaches and if there are brackets that hold it place. My mystery continues... I appreciate your help!!!

I’d say from that picture that the bracket would likely interfere with the stock res location, but it looks potentially easy to relocate the res. Maybe warn has a suggestion. Their pre sales support is quite good.

Sponsored

 

[MikeVeee]

Yes, Relocation is a possibility. I will have to call Warn and speak to someone in the know. I emailed them and only got this response, "I do not believe those parts will work on the Mojave. We have not confirmed that." So my initial interaction with them wasn't too impressive. Thanks again!

 

[blau iii]

H

LOD Destroyer stubby with Skid

How are you liking that BD lightbar? I'm leaning towards that on a fairlead mount in Amber for me. Ihave two slim lights on the a pilar but want some yellow light for snow around here.

 

[TheTrailGeek]

H

How are you liking that BD lightbar? I'm leaning towards that on a fairlead mount in Amber for me. Ihave two slim lights on the a pilar but want some yellow light for snow around here.

I really like it. I might swap out the lens for amber as well. Our fog in the NC mountains can be THICK!!

 

[Lynn_F]

Hi guys, does anybody make a front bumper with 4 cutouts for lights?(not the usual 2).
I want the four so I can run my amber fogs and another set of lights as well. Thanks for any help.

I have never seen one with 4 cut-outs but the Go Rhino stubby has a light bar cut that holds 4 cube lights. I just installed these Lasfit switchback amber/white fog light bulbs into my factory bumper. They change every time you turn them off and then back on. Smittybilt Stryker coming soon...

 

[OffroadAlliance.com]

Hi guys, does anybody make a front bumper with 4 cutouts for lights?(not the usual 2).
I want the four so I can run my amber fogs and another set of lights as well. Thanks for any help.

I have both of these bumper in stock. Each holds up to 4 pod lights or a light bar.

 

[peterpilot379]

Rugged Ridge HD Full Width

 

[JT Thomas]

Rugged Ridge HD Full Width

Looks good! Mine gets here tomorrow with overrider bar. The winch is another story. I have to embezzle more funds patiently so the wife doesn’t bust me but I’ll get there.

 

[MikeVeee]

Rugged Ridge HD Full Width

Looks great!! Is that the stock Mojave skid plate painted orange? What skid plate did you use if not the factory Mojave one and does it go far enough back to protect the shocks reservoirs? Any modifications needed make if fit with the new bumper and winch?

 

[AmericnGladiator]

Motobilt Crusher w/ Warn & Factor 55

 

[DirkG]

I've mentioned before that this is my first Jeep. I've owned many different models and brands over the years and have been modding vehicles since 1995. Maybe my E46 325i was somewhat close, but this thread proves Jeep aftermarket support is insane. The selections and variation of those selections is unreal.

This thread is incredibly helpful. ?

 

[MikeVeee]

Looks Awesome! You feel like it changed the handling at all with all the added weight in front?

 

[Rusty PW]

Does anyone have the Rusty's Full width Trail Bumper - Series 2? I'm interested in it.

 

[camargoman907]

Quadratic QRC Full Width with Warn Evo 12s Winch. The JL is running the Arcus Stubby from Rugged Ridge.

Sponsored