Tire deflators

[AmishMike]

Suggestions on tire deflators?
I have a set of TrailHeads and I am down to 2 of them working properly.
I am not a fan of the ones that remove the valve core.

Sponsored

 

[Jaxmax]

I use Trailheads, USA product when I bought t hem and no problems, they can be taken apart and cleaned, never got sand in mine after all these years, and I agree about the ones taking the stem out seems more of a chance of something going wrong. Sorry Mike it's all I got not much help .....jack

 

[jeepers29]

The staun's are very nice.

 

[Prescottmojave]

I have used the Staun's for years with no issues. Might be a good time to think about a 4 tire inflation system.

 

[AmishMike]

Jack, I was thinking about taking them apart to clean them. I wonder if there is corrosion in them. I do love them in their pouch in the truck. I have not left them on to drive like some do.
Guess that I could try that first.

 

[ttn333]

Love my teraflex nomad wheels . Also Innovativ AT Product 4 tire air up/down system works really well.

 

[Mbryson]

Love my teraflex nomad wheels . Also Innovativ AT Product 4 tire air up/down system works really well.

I have the Nomad wheels on my trail rig. Miss them a lot on the JT


I had to resort to these, which work well but make me realize how spoiled I am with the Nomads.

 

[ttn333]

@TeraFlex You guys need to sell valve stem caps. Just the caps, not cap and valve stem as people lose their caps easily (or stolen) and don't want to pay $17 per cap/stem just to get some caps.

 

[AmishMike]

@Jaxmax I took them apart and they looked like new. Cleaned, greased and reassembled. Not sure when I will have time to check out their operation.

 

[DocMike]

yep. Spend the $100 and get them. I had cheap ones that were crap.

The staun's are very nice.

 

[ttn333]

There's two valves, one for deflation and the other for inflation. The inflation valve is just a normal schraeder valve with a fancy protective cap. So yes, they fit. Also, it's much easier and more convenient to use the Nomad deflation valve. You can preset the pressure to deflate to.

 

[ttn333]

I get it. Has not presented any problem whatsoever.

 

[BlueScapegoat]

Another vote for Staun, have them set to 5psi, they always hit the target, even that low. Nice little leather case too, keep it in the glove box.

Sponsored