TPMS Screen Gone

[BAT]

Installed Tazer Lite, Set TPMS to Yes and 25 on the tires. The TPMS screen has now disappeared. Have gone over the settings again as well as unmarried and returned to default but still no TPMS Screen any longer

Sponsored

 

[johnparjr]

No Clue reach out to Zautomotive they are really helpful

 

[TroutFishingInAmerica]

Have any codes? Might have a clue where to go if it threw a code.
I would try the simple stuff first, disconnect both batteries for 3 beers to an hour. See if it resets to factory. Can't hurt.

 

[BAT]

Have any codes? Might have a clue where to go if it threw a code.
I would try the simple stuff first, disconnect both batteries for 3 beers to an hour. See if it resets to factory. Can't hurt.

No codes, no nothing it just disappeared. I'll try battery disconnect see if that does anything

 

[Gobi Wan K]

I will throw this out but I am not 100% sure so don't beat me up. Depending on which package you have you can select which screens to show in the dash cluster. If you go into the settings for the dash cluster you will find it. I suspect it might be possible for the TAZER to have reset those selections.

 

[Mojavicon]

I'm having the same problem. Following this thread.

 

[BAT]

I will throw this out but I am not 100% sure so don't beat me up. Depending on which package you have you can select which screens to show in the dash cluster. If you go into the settings for the dash cluster you will find it. I suspect it might be possible for the TAZER to have reset those selections.

Yea been through all the settings, etc the TPMS Monitor Screen option is gone from selection. I'll have to wait till the tropical storm passes and look into tackling this issue further in the week to much rain, etc to be messing outside with the truck right now. It was there in the selections but after I used the Taser to change the TPMS lower limits settings the screen disappeared and has not come back even after going back to defaults, unmarrying the Taser, etc.

 

[Pug]

I had a difficult time finding this screen when mine disappeared. found a YouTube video on how to find it. Cannot remember the steps but it worked. It was kind of hidden in the settings. Good luck.

 

[Gobi Wan K]

Yea been through all the settings, etc the TPMS Monitor Screen option is gone from selection. I'll have to wait till the tropical storm passes and look into tackling this issue further in the week to much rain, etc to be messing outside with the truck right now. It was there in the selections but after I used the Taser to change the TPMS lower limits settings the screen disappeared and has not come back even after going back to defaults, unmarrying the Taser, etc.

Unusual for sure. I know things can get screwed up sometimes and they take a few cycles to come back. I know I lost a few things when they pushed the update a few months ago and took a little bit for everything to come back.
Good luck with it. And stay safe.

 

[Mojavicon]

I had this same problem. After seeing some solutions on JL forums, I found that toggling the TPMS OFF then ON through the Tazer menu, then a full reboot, fixed everything for me. Give that a try.

 

[BAT]

I had this same problem. After seeing some solutions on JL forums, I found that toggling the TPMS OFF then ON through the Tazer menu, then a full reboot, fixed everything for me. Give that a try.

Yea haven't had a chance with all the rain from the storm now that its past I am going to go back into it and mess with the settings again and maybe change the TPMS Tires settings numbers as well then reboot and see if that brings it back

 

[BAT]

I got it back up and running. I toggled the TPMS off and then on and did a full reboot but that didn't work. So I changed the PSI settings up from 26 per tire to 30 per tire and did a full reboot and boom the TPMS Screen showed back up again. So I guess can't turn the tires down to 26 PSI with the Tazer without losing the TPMS screen or least that appears to be the cause of mine going out.

 

[BruteForce]

Set TPMS to 27psi and you'll have the screen. Set it below 27psi and you lose the screen. I've seen this with my Pulsar and TrailCal2..

 

[BAT]

Set TPMS to 27psi and you'll have the screen. Set it below 27psi and you lose the screen. I've seen this with my Pulsar and TrailCal2..

Yea I am not going to be airing down anytime soon again so for now will just leave it at 30 till I play with it some more. I did talk to Z Automotive and they said that they didn't think it should be doing that. Perhaps its something within the jeep settings themselves I don't know all I can inform is if you go to 25 or 26 PSI then good chance your TPMS Screen is gonna disappear.

Sponsored