What can we do for you?

[kickingaz]

Hi Benny,

I was following a link on the Extreme Recon fender extension install but I can't seem to locate it now. If I recall, you were supposed to order two sets or fronts or two sets or rears, but not a front and rear set. Does this sound familiar to you (or correct to you)? Either way, can you get me pricing on the Extreme Recon fender extensions? I will need 2 sets as my son is also going to do this on his Gladiator. He also bought a steel bumper for his and needs the fog light brackets as he had a plastic bumper previously. Can you get us a part number and pricing for the fog light brackets on the steel bumper as well?

On another note I finally found a set of bead lock rings that we had on backorder since last July!

Thanks Benny.

Sponsored

 

[AllMoparParts.com]

Hi Benny,

I’m looking at parts here:https://parts.allmoparparts.com/oem-parts/mopar-front-bumper-applique-right-6bu58tzzaa
https://parts.allmoparparts.com/oem-parts/mopar-front-bumper-applique-left-6bu59tzzaa

Are these black colored bezels? Can you Dm me pricing for these? Thank you.

Hi,
No these do not come pre-painted. They are a bare plastic finish. Pricing is as shown online but I will send a code you can use.

Thanks,
- Benny

 

[AllMoparParts.com]

Hi Benny,

I was following a link on the Extreme Recon fender extension install but I can't seem to locate it now. If I recall, you were supposed to order two sets or fronts or two sets or rears, but not a front and rear set. Does this sound familiar to you (or correct to you)? Either way, can you get me pricing on the Extreme Recon fender extensions? I will need 2 sets as my son is also going to do this on his Gladiator. He also bought a steel bumper for his and needs the fog light brackets as he had a plastic bumper previously. Can you get us a part number and pricing for the fog light brackets on the steel bumper as well?

On another note I finally found a set of bead lock rings that we had on backorder since last July!

Thanks Benny.

Hi Scott,

I believe it was fronts that are required for a JT. I had a brief discussion with a customer about them but never did see the thread.

Here are links to just the fronts
https://parts.allmoparparts.com/oem-parts/mopar-front-fender-spat-left-68536653aa
https://parts.allmoparparts.com/oem-parts/mopar-front-fender-spat-right-68536652aa

Youll want to order x2 of each. I will also send you a code you can use.

Good deal on the rings! Where did you find them?

- Benny

 

[kickingaz]

Hi Scott,

I believe it was fronts that are required for a JT. I had a brief discussion with a customer about them but never did see the thread.

Here are links to just the fronts
https://parts.allmoparparts.com/oem-parts/mopar-front-fender-spat-left-68536653aa
https://parts.allmoparparts.com/oem-parts/mopar-front-fender-spat-right-68536652aa

Youll want to order x2 of each. I will also send you a code you can use.

Good deal on the rings! Where did you find them?

- Benny

Can you get us a part number and pricing for the fog light brackets on the steel bumper as well (my son is moving his fog lights from his plastic bumper to a steel bumper)?

I put out a WTB for them on this forum for the rings and a member had them...got lucky as they were brand new and he had 5.

 

[AllMoparParts.com]

Can you get us a part number and pricing for the fog light brackets on the steel bumper as well (my son is moving his fog lights from his plastic bumper to a steel bumper)?

I put out a WTB for them on this forum for the rings and a member had them...got lucky as they were brand new and he had 5.

I think you need to go aftermarket for those. The factory LED lamps used on steel bumpers have integrated brackets. They are not the same as used on a plastic bumper. This is what I believe you are going to need https://maximus-3.com/jl-bumper-accessories-/jl-fog-light-adapter-bracket

- Benny

 

[chorky]

Hey Benny @AllMoparParts.com

Could you give me the offset/backspace of these OEM JTR wheels? Also, a part number as well so I can pick up another one since the current spare is a steel one?

Thank you

 

[AllMoparParts.com]

Hey Benny @AllMoparParts.com

Could you give me the offset/backspace of these OEM JTR wheels? Also, a part number as well so I can pick up another one since the current spare is a steel one?

Thank you

Hi,
Based on 3rd party data the wheel has a 44.45mm offset. Here is a link to it
https://parts.allmoparparts.com/oem-parts/mopar-aluminum-wheel-68567322aa
I will send a code you can use. Please let me know if you have any other questions.
Thanks,
-Benny

 

[22rubi1202]

Could I get a military discount? Need to order the receiver hitch for a 22 rubicon.

 

[AllMoparParts.com]

Could I get a military discount? Need to order the receiver hitch for a 22 rubicon.

Hi Chris,
I PM'd you a code.

Thanks!
- Benny

 

[Dead man walking]

First time Gladiator owner my Jeep has the 7” upgrade from the 5” only problem is it’s a bone stock sport no power locks or windows ( I am an old fashioned kind of guy ) and I am really missing the volume and tuner knobs is there a center stack that will help fix this problem 2021 gladiator thanks for any help you can offer

 

[ShadowsPapa]

Benny - part number and price for front body bolt?
EDIT - not the "front" but the one by the A pillar, just behind the front wheel.
(the front one is ahead of the axle in the area of the engine bay - so it's not that one)
The big long bolt with 3 tubes of Loc-tite spread all over all threads that holds the body to the frame......
It is the one roughly below A pillar, behind the front axle. It sits near the rocker panel pinch weld area not far from where a front mud flap would be.

This is part of it...........the rest is solidly glued up into the body ->

 

[Lunentucker]

Benny - part number and price for front body bolt? The big long bolt with 3 tubes of Loc-tite spread all over all threads that holds the body to the frame......

This is part of it...........the rest is solidly glued up into the body ->

According to the manual you're supposed to use a heat induction tool to loosen those up.
(I couldn't just leave it there like that)

 

[ShadowsPapa]

According to the manual you're supposed to use a heat induction tool to loosen those up.
(I couldn't just leave it there like that)

I have one on order now - a day too late, of course.

Manual? What manual? The owner's manual for Jeep? Odd, found nothing about body bolts in the manual. I need to contact Jeep, maybe a class action suite!

The inductor will be used to warm things up when I do the final torque on those bolts - which will happen after the steps are installed.

 

[Lunentucker]

I have one on order now - a day too late, of course.

Manual? What manual? The owner's manual for Jeep? Odd, found nothing about body bolts in the manual.

The inductor will be used to warm things up when I do the final torque on those bolts - which will happen after the steps are installed.

Service manual.

 

[Beemer533]

Benny - part number and price for front body bolt? The big long bolt with 3 tubes of Loc-tite spread all over all threads that holds the body to the frame......

This is part of it...........the rest is solidly glued up into the body ->

Man, that sucks.. I just did mine and I was blissfully unaware of this possibility...

I was thinking about replacing my bolts though after reading about these breaking but I'm debating on whether or not it's worth messing with them now ..

Benny can confirm but these are what I have in my cart currently...

Front bolts: 06512962AA

Middle bolts: 6508326AA

Rear bolts: 06512897AA

Sponsored