What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Von1992]

Flashlight was my first but now leaning toward an element fire extinguisher.

I have a flashlight holder from quadratec that I have mounted on the side of the seat. On the MMP I have my knife mounted under the driver seat, and an element fire extinguisher under the passenger seat.

Sponsored

 

[Minty JL]

nice Fleshlite holder ?

 

[Sigz]

Painted the silver bezel around the fog lights. Also added a match tint to the front two windows.

Lovin' it.

 

[calicorks]

It drives just like stock but the center of gravity is a bit higher since it’s lifted so can feel the difference when turning. I also had the geo correction brackets installed which helped as well.

I’d say go for it if you want to keep the stock suspension. Although I’ve only had it lifted for a couple days, it drives well.

just need to get larger tires.

I have the bigger tires, it needs a bit of a lift to compensate for the look. Also ground clearance too.

 

[rm1515]

My qtec flashlight holder broke ?

Mine did as well and they sent me another one for free..

 

[Von1992]

Mine did as well and they sent me another one for free..

Same here, I think after it breaks again, I might find another solution to mount the flashlight on the side of the seat.

 

[Matts4313]

Woke up at like 6 am, nothing on the docket this morning, so I threw on the stubby bumper and winch thats sitting in my garage. Need to do the wiring still.

 

[DocMike]

Back on the road...
@TeraFlex ball joints and Reid Knuckles.
Top ball joints did not come out too easy. Had to use a torch. But it's done. Going to go get an alignment just to be safe. Glad I did not do this in the driveway but picked at it with my son in the shop over a few days.

 

[Lug]

Got a Line-x bed liner

 

[Blue Ridge]

Same here, I think after it breaks again, I might find another solution to mount the flashlight on the side of the seat.

If you're not opposed to having it on the roll bar, the ones that mount there come in awfully handy.

 

[Blue Ridge]

https://www.amazon.com/gp/product/B01A9NR7F8

 

[ShrimpHappens]

Thought I was lucky and had invincible sun visors. JT proved me wrong last week and joined the visor club. AUXITO to the rescue.

 

[Geoarch]

Installed the Fox Mopar steering stabilizer, and the Metalcloak Front Durotrak adjustable track bar (see image). After installation of the Mopar 2" lift, the track was off 2 cm to the driver's side. The Metalcloak track bar corrected this.

Be aware that if installing the Metalcloak adjustable track bar, at least on the Rubicon, the frame side bracket needs to be ground down quite a bit since the Metalcloak oversized forged end is larger than stock. Also, the 2 cm correction is large enough that the electronic stability control, forward collision warning (FCW), and adaptive cruise control lights will come on and electronic stability control won't be available until re-alignment. Also the steering wheel is significantly off-center. All these issues are related, and hopefully remedied after alignment.

 

[JTBurns]

Going to rausch creek tomorrow, which means I added a skid plate today. I've read some horror stories about installing the rancho front diff plate, but I guess I got lucky. Install was easy, and Amazon said they only had 15 left last week when I ordered for $145

 

[Sandevino]

I installed the block heater in my ecodiesel.

Sponsored