What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[813 Fabrication & Design]

Yeah it’s great. I’ve been using an Atlas 46 Yorktown Tool Roll for over a year with basically every hand tool I need to work on this vehicle (the roll weighs over 60 lbs). It all fits on the long side of the bin. I added some 1 1/2 inch diameter PVC pipe spacers that I cut under it on that side to better support the weight, since the bin floats. This thing totally solved my tool storage problem. And now I’ve got this second use. It’s a massive improvement over the stock storage tray/box and it’s secure.

Glad to hear!

Sponsored

 

[Bathory1990]

Rugged Ridge sport bed rack installed

 

[Jeepin' John]

Fauxpar bumper!

 

[Carrotzilla]

Molle Panel Systems - Overhead Molle Panel installed
The only note that I would make, and only because I'm a neatfreq, is I installed some 3m doublesided cushion tapeto avoid the metal on metal contact. I'm very pleased with the results and it only took me about 20 minutes to install by myself.

I get the rack but why over head?

 

[NeatFreq]

I like the MOLLE, but is that carpet ? I like it.

Yes it is, coverking hardtop liner kit, I did a post on it in my build

 

[Carrotzilla]

Fauxpar bumper!

i like it

 

[NeatFreq]

Well, that was most of my day but worth it, sometimes it sucks being such a neatfreq and having to have every little wire hidden, ran and ziptied, but if you're gonna do something, do it right.

Yeasu FTM-200D installed

 

[NeatFreq]

I get the rack but why over head?

Ham radio mount, see my new post, I just finished

 

[NeatFreq]

Replaced the Mopar end links (From 2” lift I was using as a stop gap) with Steersmarts Yeti XD end links.

I love those

 

[chorky]

Ham radio mount, see my new post, I just finished

Nice install I like that a lot.

It's also a great location for seatbelt cutters and bino's.

 

[NeatFreq]

Nice install I like that a lot.

It's also a great location for seatbelt cutters and bino's.

There's a few different ones on the market, I like this one because it offered the most molle area, others had two big gaps, I don't mind the two extra seconds it takes me to take the tops off. Thanks for the comment

 

[Jglad15]

I kept hearing a rattle or some type of noise every time I went over a bump, pot hole etc. I’ve been trying to chase it down looking all over the bolts on my suspension, cleared everything out under my rear seat that could be moving around. And I think I finally found it. Above the rear drive shaft the brake lines sit in these lil hooks and they move around like crazy. So I zip tied them to the hooks. Knock on wood took it for a drive and no more noise. Hoping that’s it.

 

[mx5red]

Finished designing and my buddy printed my overhead console thing (not sure what to call it) for my spod and g screen.. Also some space left for something else possibly.

I still need to do the wiring, but pretty happy so far.

I may or may not sand and paint it, but it kind of dissappears up there, so probably not lol..

That’s freaking awesome

 

[mx5red]

Well, that was most of my day but worth it, sometimes it sucks being such a neatfreq and having to have every little wire hidden, ran and ziptied, but if you're gonna do something, do it right.

Yeasu FTM-200D installed

Those wires aren’t tied down at 90’ angles…

 

[NeatFreq]

Those wires aren’t tied down at 90’ angles…

The lower one is the seat airbag, which is attached back under the seat now, as for the power wire it's ziptied in place and I left a little slack for when I run the antenna for final cable management, but I hear ya

Sponsored