What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Chaos Theory]

Trade for a stock grill (any color)?

So after reading a 19-page thread (19!) at the Wrangler forum which showcased the hate for that grill, I need to retract my offer. It also appears to block a portion of the headlight, which would probably affect my Diode Dynamics Elite max "off road" mode.

Sponsored

 

[KX L]

MOPAR JL/JT GMRS/CB Grab Bar Mic Mount
5 min install, and super clean, absolutely worth the $20

Your Bulletpoint mount looks like it's going through the grab handle but their site doesn't show that option. Is it an optical illusion? Did you design your own using their components?

 

[NeatFreq]

Your Bulletpoint mount looks like it's going through the grab handle but their site doesn't show that option. Is it an optical illusion? Did you design your own using their components?

Ask and you shall receive

https://www.bulletpointmountingsolu...2018/products/jeep-jl-grab-bar-mounting-point

 

[Freems]

NP, I understand. 19 pages of hate over a grill, Wow! It’s not my favorite either but it came on the Jeep when purchased, but with those kind of stats, I’m inclined to keep it on now and post everyday with a full frontal pic to feed grumpy/angry/mad max grill haters worldwide. How about the haters rolling up some pages too: every possible square inch of a Jeep to hang LED lights, then make them do a light show changing colors, or moronic stickers plastered all over their jeeps (marketing for companies without receiving marketing dollars) while creating the perfect pick list for thief’s, or stuffed animals on the dash in their Jeeps, or a big bullet for a radio antenna, or…how about Embracing difference, don’t hate it, it‘s still a Jeep, I think it’s why your on it his site.

 

[Vanishing Point]

Working on getting my ground plane/roof rack project for my radios
going. The front aluminum sheet got mounted fine. Then a minimum disaster struck ..... the second sheet of aluminum was not cut square by the supplier. So next weekend I'm going to have to cut aluminum. Working out of an apartment garage always makes these small detours more challenging. But I can still drill holes for more mounting screws for the first sheet today And order an aluminum cutting saw blade.

Yay, aluminum cutting.

 

[Freems]

Check this out, probably close to if not the best type of solution -
https://www.jeepgladiatorforum.com/...u-powering-the-winch.29534/page-3#post-508973

Thanks for sending

 

[antwon412]

NP, I understand. 19 pages of hate over a grill, Wow! It’s not my favorite either but it came on the Jeep when purchased, but with those kind of stats, I’m inclined to keep it on now and post everyday with a full frontal pic to feed grumpy/angry/mad max grill haters worldwide. How about the haters rolling up some pages too: every possible square inch of a Jeep to hang LED lights, then make them do a light show changing colors, or moronic stickers plastered all over their jeeps (marketing for companies without receiving marketing dollars) while creating the perfect pick list for thief’s, or stuffed animals on the dash in their Jeeps, or a big bullet for a radio antenna, or…how about Embracing difference, don’t hate it, it‘s still a Jeep, I think it’s why your on it his site.

Different is fine.

Ugly is just ugly ?

 

[toddarama]

Working out of an apartment garage always makes these small detours more challenging.

Gotta love the apartment life ... I deal with the same crap trying to even the simplest mods. You might want to score the line you need to cut and find a local fab shop who would make that cut for you. Probably wouldn't cost any more than a blade for aluminum.

 

[Chuck]

Working on getting my ground plane/roof rack project for my radios
going. The front aluminum sheet got mounted fine. Then a minimum disaster struck ..... the second sheet of aluminum was not cut square by the supplier. So next weekend I'm going to have to cut aluminum. Working out of an apartment garage always makes these small detours more challenging. But I can still drill holes for more mounting screws for the first sheet today And order an aluminum cutting saw blade.

Yay, aluminum cutting.

I’ve cut aluminum plate with a straight edge and circular saw with fine carbon tooth blade. I use the same type blade on my miter saw for cutting aluminum square tube, angle and narrow flat stock. Just cut slow.

 

[ShadowsPapa]

Gorgeous property.

Agree. It's what we've dreamed of. It's beautiful for sure.
My wife and I were having breakfast in our sunroom (my wife calls "the porch" and made a comment "I'm sure glad we have trees on at least 2 sides and no one has bought the land across the road yet". We were watching the birds, the deer walking just barely in the tree line, etc.

 

[ShadowsPapa]

I’ve cut aluminum plate with a straight edge and circular saw with fine carbon tooth blade. I use the same type blade on my miter saw for cutting aluminum square tube, angle and narrow flat stock. Just cut slow.

I used to turn an old blade around so it spun backwards to cut steel roofing material.... noisy as heck, hot sharp metal everywhere, but it worked.

 

[Silverator]

Very nice work.

Thanks man. Very kind and much appreciated. I'm having fun. Hopefully mine will be starting to look more like yours when she grows up.

 

[dmwphoto]

Ask and you shall receive

https://www.bulletpointmountingsolu...2018/products/jeep-jl-grab-bar-mounting-point

Interesting but my grab bar doesn’t have that bolt?

 

[NeatFreq]

Interesting but my grab bar doesn’t have that bolt?

Really?!? I have a 21' so idk which models and years do or don't

 

[Jglad15]

Been here ten years now, and I'm nowhere near finished making it better, but it's coming along.
70 acres total. 2 miles of ATV/waling trails in the woods, stocked pond, food plots on the perimeters to attract wildlife. My last five bucks and I lost count on turkeys have come from the "yard".
My biggest buck lifetime was December 2019 and shot from the porch.

Wildflowers have been a fun and challenging project. They do very well mixed in the food plots and along the steep pond banks for beauty, erosion control, and lowered maintenance effort.

Eagles, ospreys, bears, bobcats, coyotes (unless I see them first),waterfowl in winter, and more.

And when can we go hunting? Lol

Sponsored