What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[carsmarshall1]

That Jack and hitch are gonna drag like crazy. You should at least get a skidplate for the hitch. I would try to get the jack as high as possible.
This is the skid I use
https://www.skidmark4x4.com/

How is the skidplate holding up? Do you have pic's of wear?

Sponsored

 

[MojaveLawyer]

That Jack and hitch are gonna drag like crazy. You should at least get a skidplate for the hitch. I would try to get the jack as high as possible.
This is the skid I use
https://www.skidmark4x4.com/

You're the best!!! You were absolutely right. My Jeep is dragging booty cheeks, just like how I am at work today. This is my next purchase! Thank you!!

 

[MojaveLawyer]

Only pic I got, weathers been so crapy!

Those Methods are nastyyy ? ? ?

 

[FreedomWV]

Installed the MBRP black series dual exhaust. Bad pic but it’s nasty out. Sounds louder but not overly loud so far no noticeable drone, will see on the interstate.

 

[Sw00per]

I was browsing around the internet and came across this tire carrier that has other features that plugs into your hitch + a lil' somewhat affordable ($2100 but I also bought a lock and some other shenanigans).

The Quality is definitely top-tier. Just wish RiG'd Supply would make a set of instructions for Jeeps.

• RiG'd Supply - Tire Carrier
• RiG'd Supply - Side Kick
• RiG'd Supply - HiLift Jack Mount
• Comes with this attached + Comes with this attached too + Comes with this too (these is the most up to date version they have at the moment for this carrier)
• Additional add-ons
• Hi-Lift Jack (FR Jack)

Been looking at that since the new 35" spare hangs a bit low...

 

[MPMB]

Only pic I got, weathers been so crapy!

Why does that shop look familiar to me? I spent my formative years in Monroe/Woodinville/Bothell/Lynnwood area.

 

[aldo98229]

Getting some practical mods done first:

1. Amazon doggy bed
2. LineX bed liner
3. Quadratec entry guards

 

[MojaveLawyer]

Been looking at that since the new 35" spare hangs a bit low...

Highly recommend brotha.

If you want some extra pics or videos, let me know. Only con, I can't see a darn thing out of the rear camera. Considered adding the JCR camera relocation bracket for that.

 

[johnchabin]

Boring… but BAK Revolver X4S Tonneau & Bedrug Classic.

Now I need an over-bed ski rack that will fit the tonneau t-slots and allow me to roll up the cover without removing skis.

 

[Free2roam]

Started mocking up the rear bumper to include TMR Customs super mega beating with a swing away. Including a double set up for 2 E mountain bikes. MOLLE panel as a gusset to take and tie in the tubing.

 

[mx5red]

Boring… but BAK Revolver X4S Tonneau & Bedrug Classic.

Now I need an over-bed ski rack that will fit the tonneau t-slots and allow me to roll up the cover without removing skis.

Been a while since I tried looking into this, but I think FrontRunner has stuff that will work
https://www.frontrunneroutfitters.c...imline-ii-fold-top-bed-rack-kit-krjg013t.html

I don't remember what leg lengths etc work so it'd be easiest just to call them.
I have Yakima racks that are too low and I can't roll the Bak4 up. I've tried other options but none are great, these extended legs and bars/ski racks (not the whole platform) would probably work well.

 

[Sw00per]

Highly recommend brotha.

If you want some extra pics or videos, let me know. Only con, I can't see a darn thing out of the rear camera. Considered adding the JCR camera relocation bracket for that.

Extra pix would be great. I did not think about the camera which is something to consider.

 

[Mojave20]

Installed some Metal cloak rear upper control arms to correct pinion angle.
Before

After

 

[WILDHOBO]

Installed some Metal cloak rear upper control arms to correct pinion angle.
Before

After

Did you do lowers as well?

 

[Mojave20]

Did you do lowers as well?

Lowers are stock. Got a little spring bow, I knew I would going in but wanted to see where I’d end up. Started at -0.5 on stock arms no bow, 2.0 no bow, 5.0 slight bow. I’ll ride with it for a while how it is. I chose better pinion angle. Needless to say but lowers will be in my future.

Sponsored