NEW - Above the Spare Tire Compressor Mount for ARB / ViAir

[813 Fabrication & Design]

Designed to mount the ARB Twin / Single Brushless Compressors, the ARB Classic Single and most ViAir Compressors. The mount DOES NOT work with the ARB Classic Twin Compressor. There is not enough height for the Classic Twin to fit. The compressor mounts above the spare tire cross member on the Jeep Gladiator. The mount is made of 4.7mm / .187" black texture powder coated aluminum for extra strength. The mount has a built-in shield to help protect the compressor.

NO CUTTING OR DRILLING REQUIRED

Included with the compressor mount kit are: Compressor mounting plate, crossmember spacer and 1/2" Grade 8 mounting hardware.

*I recommend relocating the air filters to a location to keep them dry. I am working on a few solutions for this and hope to have something soon!

https://813fabrication.com/products/jeep-gladiator-above-the-spare-tire-mount

Sponsored

 

[Commodus]

Designed to mount the ARB Twin / Single Brushless Compressors, the ARB Classic Single and most ViAir Compressors. The mount DOES NOT work with the ARB Classic Twin Compressor. There is not enough height for the Classic Twin to fit. The compressor mounts above the spare tire cross member on the Jeep Gladiator. The mount is made of 4.7mm / .187" black texture powder coated aluminum for extra strength. The mount has a built-in shield to help protect the compressor.

NO CUTTING OR DRILLING REQUIRED

Included with the compressor mount kit are: Compressor mounting plate, crossmember spacer and 1/2" Grade 8 mounting hardware.

*I recommend relocating the air filters to a location to keep them dry. I am working on a few solutions for this and hope to have something soon!

https://813fabrication.com/products/jeep-gladiator-above-the-spare-tire-mount

Great have been waiting for someone to come up with a solution for the Gladiator

 

[WILDHOBO]

Designed to mount the ARB Twin / Single Brushless Compressors, the ARB Classic Single and most ViAir Compressors. The mount DOES NOT work with the ARB Classic Twin Compressor. There is not enough height for the Classic Twin to fit. The compressor mounts above the spare tire cross member on the Jeep Gladiator. The mount is made of 4.7mm / .187" black texture powder coated aluminum for extra strength. The mount has a built-in shield to help protect the compressor.

NO CUTTING OR DRILLING REQUIRED

Included with the compressor mount kit are: Compressor mounting plate, crossmember spacer and 1/2" Grade 8 mounting hardware.

*I recommend relocating the air filters to a location to keep them dry. I am working on a few solutions for this and hope to have something soon!

https://813fabrication.com/products/jeep-gladiator-above-the-spare-tire-mount

I use co2, but love this and am trying to think of what else I could mount there.

 

[ChrisNLA]

We did this on a 2020 Gladiator shortly after they came out.

Except we just sheet metal screwed the compressor above the tire straight to the truck using the included backet Installed the air outlet just inside the tailgate in the bedside.

Your method / product looks much nicer, lol.

 

[813 Fabrication & Design]

Great have been waiting for someone to come up with a solution for the Gladiator

thanks! I had thought of doing it for awhile but had not got to it yet

We did this on a 2020 Gladiator shortly after they came out.

Except we just sheet metal screwed the compressor above the tire straight to the truck using the included backet Installed the air outlet just inside the tailgate in the bedside.

Your method / product looks much nicer, lol.

awesome! Sounds like it worked though

 

[tysongladiator]

I mounted my compressor under my bed a couple years ago. Drilled holes in the bed. It's on the passenger side next to the spare tire. It works but it doesn't look as good and neat as your kit.

 

[DanW]

Great idea and location! I look forward to seeing how people set up with running the hoses and such.

 

[813 Fabrication & Design]

I mounted my compressor under my bed a couple years ago. Drilled holes in the bed. It's on the passenger side next to the spare tire. It works but it doesn't look as good and neat as your kit.

Great idea and location! I look forward to seeing how people set up with running the hoses and such.

Thanks! I am working on a few ideas to get the filters relocated. It will be easy for the newer trucks, a bit more customization will be needed for 20-24 trucks without the large opening on the driver side of the bed.

 

[dewetha]

I’m not a fan of the mounts under the seat or in the engine bay. I was settling on putting in the bed but this setup looks fantastic and now looks to be a great location.

 

[Sweetums]

I'd love to see the installation instructions or a video, it looks pretty tight up there. Does this also come with everything needed to run the air line somewhere accessible for an air chuck?

I also see you recommend relocating the air filters; are there any plans to include the hoses for this in the kit? I could always go get my own, but it would be nice to have it all in one.

 

[813 Fabrication & Design]

I’m not a fan of the mounts under the seat or in the engine bay. I was settling on putting in the bed but this setup looks fantastic and now looks to be a great location.

Thanks!

 

[813 Fabrication & Design]

I'd love to see the installation instructions or a video, it looks pretty tight up there. Does this also come with everything needed to run the air line somewhere accessible for an air chuck?

I also see you recommend relocating the air filters; are there any plans to include the hoses for this in the kit? I could always go get my own, but it would be nice to have it all in one.

it is tight, but works great with everything except the classic style ARB twin. I am working on a few different solutions for relocating the filters and air couplers. I currently have the bumper inserts for the air couplers. I plan to offer everything needed once I have everything worked out for relocation.

 

[Sweetums]

it is tight, but works great with everything except the classic style ARB twin. I am working on a few different solutions for relocating the filters and air couplers. I currently have the bumper inserts for the air couplers. I plan to offer everything needed once I have everything worked out for relocation.

Hopefully the air coupler won’t be in the reflector cutout, since so many people (me included) have auxiliary lights there.

 

[813 Fabrication & Design]

Hopefully the air coupler won’t be in the reflector cutout, since so many people (me included) have auxiliary lights there.

Yes, the first placement I have is in the reflector area. I have a plain version and a version with Baja Designs Rock light. I am working on other locations also.

 

[GeekJT]

I've looked at these forever, how well do they hold up to water and stuff splashing on them, etc. Or is that in an area that doesn't get much? Thinking about if driving in rain, etc. For sure should come with a plan for the air filters and hoses to do it. or offer them as a separate kit.

Sponsored