What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[danielspivey]

Added 35% tint on front and back windows. Not too dark but can’t see anything in the back and front you have to get right on the window to see in.

Sponsored

 

[ShadowsPapa]

Added 35% tint on front and back windows. Not too dark but can’t see anything in the back and front you have to get right on the window to see in.

I know my wife doesn't like white - but that looks sharp, especially with the black accents and the tinted windows.

Now my question I have been meaning to ask for weeks - the "Gladiator" on the hood - was that the factory option or third party?

 

[Proximo]

I know my wife doesn't like white - but that looks sharp, especially with the black accents and the tinted windows.

Now my question I have been meaning to ask for weeks - the "Gladiator" on the hood - was that the factory option or third party?

@pixeldecals did my "Gladiator"

 

[danielspivey]

I know my wife doesn't like white - but that looks sharp, especially with the black accents and the tinted windows.

Now my question I have been meaning to ask for weeks - the "Gladiator" on the hood - was that the factory option or third party?

Thanks! The sticker was after market. I actually got it from amazon from a seller that looks like don’t sell them anymore... https://www.amazon.com/gp/aw/d/B07T581BFM?psc=1&ref=ppx_pop_mob_b_asin_title

it was like $20 and I liked it because it’s almost the exact same text style as the little stock gladiator lettering.

 

[ShadowsPapa]

@pixeldecals did my "Gladiator"

Was looking at their Hydro Blue Edition decal pair - those are sort of cool. Thanks.

 

[MATANZAS STING RAY]

WINTER.......... DRAWERS are coming!

Actually while helping me load the plywood, the Menards employee pressed down on my fire extinguisher, whose pin fell out weeks ago..... Knew I should have replaced that.

Drawers are coming soon though.

LOL, at least it wasn't in the cab!

A guy's jeep on a windy day at the beach!

 

[ShadowsPapa]

LOL, at least it wasn't in the cab!

A guy's jeep on a windy day at the beach!

Wow, not sure whether to laugh or offer sympathy for the clean-up they face. Oh, well, it's a Jeep - you expect that, right? (I hope)

 

[Troybilt]

LOL, at least it wasn't in the cab!

A guy's jeep on a windy day at the beach!

I let my boy use my JT to go to Prom shortly after I got her. When I got in it the next morning there was a small amount of glitter on the seats and dash. This is what it looked like in my mind. The bad part is that after many days of running doorless and topless and many times vacuuming I still find glitter. This poor guy will forever find sand no matter how long he owns it.

 

[Troybilt]

Finally replaced the factory reflectors in the rear bumper with the lights and mounts that i fabed up. I started this some time back but my knees started giving me problems so it took me a long time to finish them up. I also ran into an issue figuring out what to use for the cover plate in order to get a flush clean look i was looking for. I'll do a wright up soon but for now here are a few pics.

Factory

Templets

Time to cut

Cover plat and retroreflective material

 

[Red Hot Sloth]

Removed stock bumper, installed new bumper and winch. It took longer to remove stock bumper than to install both the new bumper and winch combined

 

[ShadowsPapa]

Removed stock bumper, installed new bumper and winch. It took longer to remove stock bumper than to install both the new bumper and winch combined

That's a nice looking setup - not too hulky, but tough, clean looking. Brings your lights up and takes care of the gap between bumper and fenders that the fillers on the Sports close up.
Leaving the air dam off?

 

[Red Hot Sloth]

Thanks, I didnt find anyone else running the same bumper so it took a lot of “eyeballing” the stock photos from the manufacturer. Once I set it into place I was pleased with its fit, but dang, with the winch mounted to it was a bit heavy. If I didnt have a floor jack with extensions I wouldnt have been able to do it alone.
The damn will be going back on for now until I can find/fab a skid plate to replace it, was going to do it today but as I took that picture the first drops of rain started to hit.

 

[ShadowsPapa]

Thanks, I didnt find anyone else running the same bumper so it took a lot of “eyeballing” the stock photos from the manufacturer. Once I set it into place I was pleased with its fit, but dang, with the winch mounted to it was a bit heavy. If I didnt have a floor jack with extensions I wouldnt have been able to do it alone.
The damn will be going back on for now until I can find/fab a skid plate to replace it, was going to do it today but as I took that picture the first drops of rain started to hit.

People wonder why I have 3 floor jacks, 4 pair of jack stands, and a transmission jack and gantry crane and engine hoist. When you work alone in your shop you can never have too many hands made of steel.

Let me know if you find a skid plate or figure out if a Rubicon plate will fit. I looked at a couple of Rubicons lately and their skid plate looks like it bolts right up to the frame horns and that should be the same on all three levels, Sport, Overland and Rubicon. I figured if the frame is the same up there, the Rubicon skid plat would fit - would need the brackets they use, though, as the skid plates bolt similar to that metal air dam backing, but also using brackets that bolt the plate to the frame.
I want to put a skid plate on in place of the plastic air dam.
And no, those Rubicon plates did not connect with the bumper in any way - the Rubicons I looked at had the standard poly over steel bumpers like the others.

 

[steffen707]

I'll do a wright up soon but for now here are a few pics.

]

How many pickles could steffen707 pick if steffen707 could pick pickles? if they're Famous Daves spicy pickles......a lot.

waiting for your write up, bad knees shouldn't delay that, right?

 

[Troybilt]

How many pickles could steffen707 pick if steffen707 could pick pickles? if they're Famous Daves spicy pickles......a lot.

waiting for your write up, bad knees shouldn't delay that, right?

My wife lady loves the Famous Daves spicy pickles. I'm more of a Bread and Butter guy

Sponsored