What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[steffen707]

Somehow I missed the background on what you’ve got going with this mod... I notice the molle racks are missing. When are you doing the full write-up on this? Is this part of the custom bed drawer system? Inquisitive minds need to know!

Lol, yeah I'll do a full write up when the bed drawer system is done, this is the 9gal potable water tank for the ~16" galley drawer. It's a slow moving project with the holidays being right now so I can't wait to show all photos at once.

Sponsored

 

[jurfie]

Now that the party is jumping
With the bass kicked in and the Vegas are pumping

 

[DMC1]

Correct. They mount using the three body mount bolts on each side (not the body pinch seam). This allows folks with the OEM Rubicon Rock Rails to keep them mounted as well.




Cerwin Vega H735
https://www.sonicelectronix.com/ite...cerwin+vega+h735&utm_content=Cerwin-Vega+H735

You will also need to order a pack of Metra 72-7902 wiring ‘jumpers’ to connect these speakers to your factory harness in the dash.

 

[windyridge89]

Added stock drings to the rail and changed the builtright hardware out for 3/8 stainless button heads.

 

[Backwoodsraider]

Eag bumper and smitty winch

 

[Red Hot Sloth]

Eag bumper and smitty winch

Looks cold where you are...thats when a knuckle buster really qualifies as a f’n knuckle buster.

 

[Backwoodsraider]

Looks cold where you are...thats when a knuckle buster really qualifies as a f’n knuckle buster.

Fortunately, no knuckles busted today

 

[Troybilt]

I aded the Rigged ridge door sill protectors to my JT and to the wife lady's JLU. I bought them a few weeks back but today was the 1st day that it reached the above 40 deg that they recommend for installation.

 

[Mark Doiron]

Working on a couple projects the past couple days.

Primary power is wired to the comm rack and radios are all powering on. NMO mount bracket on order; should have any day now and can install it by hood. Comms should be good to go after that--just don't switch between services on me. I can do CB, GMRS or ham, but will need to switch antennas and the coax connection between services. It's possible my 2M/70CM antenna will handle GMRS freq's okay, but still need to switch coax cable between radios ...

These are powered by the OEM Aux 1 switch (wish they'd let us make custom switch toggles for these like I did for my JK sPod panel) ...

Also got the ARB Twin Compressor mounted and the wiring run through the drain plug under the passenger seat (tried through the firewall but no joy with that route--wires way too big). Plan to wire this through a relay controlled by an aux switch. Compressor draws 53 amps at max load, and max aux switch is 40 amps. So will wire through relay I'll mount by battery ...

 

[WhatExit?]

Added stock drings to the rail and changed the builtright hardware out for 3/8 stainless button heads.

I like it but please (you and everyone else) provide info and a link to stuff you post up so others who like it can do it!

 

[jmeyer]

Nothing crazy but added a “GLADIATOR” decal over the tail light and my little brother got me some grab bars for Christmas. I need to take a picture of the grab bars.

 

[WhatExit?]

Working on a couple projects the past couple days.

Primary power is wired to the comm rack and radios are all powering on. NMO mount bracket on order; should have any day now and can install it by hood. Comms should be good to go after that--just don't switch between services on me. I can do CB, GMRS or ham, but will need to switch antennas and the coax connection between services. It's possible my 2M/70CM antenna will handle GMRS freq's okay, but still need to switch coax cable between radios ...

These are powered by the OEM Aux 1 switch (wish they'd let us make custom switch toggles for these like I did for my JK sPod panel) ...

Also got the ARB Twin Compressor mounted and the wiring run through the drain plug under the passenger seat (tried through the firewall but no joy with that route--wires way too big). Plan to wire this through a relay controlled by an aux switch. Compressor draws 53 amps at max load, and max aux switch is 40 amps. So will wire through relay I'll mount by battery ...

Like it all. any chance you can post up a thread or two with info on what and how you did?

 

[mazeppa]

Added stock drings to the rail and changed the builtright hardware out for 3/8 stainless button heads.

Loving the tool bags/pouches.

 

[ffward]

Made an important modification today!!

 

[OrangeChuck]

Made an important modification today!!

It may be personal preference, but it seems you’ve mounted your most excellent upgrade to best suit a left-handed person.

Sponsored