What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[khokhonutt]

Added Jeep slush mats, Rugged Ridge sill protectors, fire extinguisher and some Atomic Monkey gear (bags, handles and FE holder).

Nice! Can you give more detail on the fire extinguisher mount?

Nevermind, when I clicked on the picture, I could see the Atomic Monkey logo.

Sponsored

 

[Soedog]

Took delivery and made the 5 minute ride home. Pulled right into the garage to start on the mods. Nothing significant or challenging just a Mopar Winch Guard and Mopar sill guards. Here we go!

 

[Paladin_JTR]

Just a bunch of stick on stuff and officially tattooed her name on (hand cut it myself from a roll of black vinyl, wanted to check the look before paying a pro to machine cut it for me). Spraying Raptor in the bed this weekend.

 

[Deleted member 24880]

Just a bunch of stick on stuff and officially tattooed her name on (hand cut it myself from a roll of black vinyl, wanted to check the look before paying a pro to machine cut it for me). Spraying Raptor in the bed this weekend.

please post picks and tips when you complete the Raptor liner. I am seriously considering doing one of these myself. Thanks!

 

[furrymurray]

Centerline Full Jacket 17X9 -12

Thank you

 

[TxGladiator]

Installed the Quadratec flashlight holder.

 

[ucijeepguy]

Today I added a Curt brake controller and remote dial.

 

[Red Hot Sloth]

Made my own bed rails today, just need some paint or powder coat.

 

[Troybilt]

Made my own bed rails today, just need some paint or powder coat.

I have been thinking of doing this same thing. What did you use for the tie down knobs? that will look great once you get it painted.

 

[eaglerugby04]

Today I added a Curt brake controller and remote dial.

I like the mounting position you chose there.

 

[Backwoodsraider]

Made my own bed rails today, just need some paint or powder coat.

I saw that company making some out of the same stuff and charging 100+, for 20 bucks worth unistrut. Good job

 

[Red Hot Sloth]

I have been thinking of doing this same thing. What did you use for the tie down knobs? that will look great once you get it painted.

The tie-downs are from my Titan that I traded in for the Gladiator, I almost kept the utility rails too hahaha. The Titans tie-downs are a bit bulky but they’ll work for now.

 

[Texops]

Installed my Rear Rockrawler 3” springs and spring correction pads these springs are long & being bigger around than any Wrangler spring, i just used my spring compressor. I ran out of time so i couldn’t install trackbar relocation bracket & my adjustable trackbar. So now i have these 3” springs all around & it drives super good.

 

[Red Hot Sloth]

I saw that company making some out of the same stuff and charging 100+, for 20 bucks worth unistrut. Good job

Yea, not thst theres anything wrong with it, but I dont mind saving myself some moolah if all it takes is about an hours worth of my time.

 

[ucijeepguy]

I like the mounting position you chose there.

Thanks. Its just right where i can see it through the steering wheel but also block the light if i dont want to see it.

Sponsored