What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[mazeppa]

New key fob.

Sponsored

 

[margrxsalt]

Are those the base uppers or the premium uppers? Curious to see what the upper look like in person.

They are the premier uppers. They match my tonneau cover and my bestop Sunrider. Hoping to drop the doors off for paint this week.

 

[Rubiwoo]

Real happy with this addition I did today.

that's cleaver.

 

[Blue Ridge]

Got my BAK Revolver x4s added today. REALLY like this cover.

 

[Gren71]

Installed sumosprings rear bump stops

didn’t notice them while pulling my trailer, but I still need to install the extension plates for my rear bump stops.

Under no load

with my travel trailer on
475lbs tongue weight w/WDH

 

[CerOf]

Spent a few hours and installed the rear half of the lift.
This is stock vs mopar lift spring. Free length was about 2” different.

 

[mx5red]

Installed sumosprings rear bump stops

didn’t notice them while pulling my trailer, but I still need to install the extension plates for my rear bump stops.

Under no load

with my travel trailer on
475lbs tongue weight w/WDH

I kinda want to try these just as premium rear bump stops..
Was gonna do Metalcloak durosprings, but they only make them for the front.
Teraflex makes them for both but they’re ugly like the stock ones

 

[PLEG1972]

This month I installed the Warn winch, the wiring and Anderson plugs for the DC to DC Ctek 250SA/120S charging setup in the tent trailer, and the two 500 amp continuous duty solenoids (controlled by the Aux dash switches) that direct power to the winch and the DC to DC charger.

Where did you get that Anderson plug?

 

[Limestone]

Where did you get that Anderson plug?

Are you interested in the Anderson plug itself or the housing for the plug?
Plug housing:
https://etsy.me/2WuG9O5
SB 175 amp Anderson plug: https://www.mouser.com/ProductDetai..._term=949&utm_content=Anderson Power Products

 

[Limestone]

Where did you get that Anderson plug?

Her is the information on the black housing: https://etsy.me/3pwe8AF

 

[IamAlan]

Added a proper VIN Plate to my Willys. https://www.thejeepsterman.com/products/c134-emblems/
A bead of silicone around the perimeter and #4 x 1/2 screws on the corners.

After the silicone cures, I'll peen the top corners a little.

 

[AlienGladiator]

Got her wrapped. ?

 

[Comicnut25]

Got her wrapped. ?

whoah!! custom.. More pics

 

[AlienGladiator]

whoah!! custom.. More pics

The very last one shows the "golden hour" shade as they put it. Can't seem to catch it on my phone yet.

 

[AlienGladiator]

whoah!! custom.. More pics

Colors in shifting light.

Sponsored