What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[FISCH]

I put on the Daystar 1.5 front and .75 back spacer kit. Then added 315/70/17 BFG ko2s on Mopar slotted off-road wheels. The spacer kits could not have been easier to put on.

Sponsored

 

[XraytecH]

Just in case the guy behind me needs to know what I'm driving.

https://limitlessparts.com/collecti...replacement-larger-style-lettering-dual-color

 

[Davekayc]

I ordered a couple pelican 2975 and a yeti 65 to fit in the back . Keeps everything clean and dry. Fit perfectly and when your tailgate is locked people cant get in them because you cant get at the latches . Still room to put a power saw , chairs ,fuel cans. And stays below box height

 

[Davekayc]

I suffered for a long time trying to order the right combination to fit proper , as none of the pieces are cheap to order wrong. . Hopefully helps someone else.

 

[mjoneil]

Had a local shop sand down and color match my textured black roof. Came out looking like it was painted from the factory.

 

[jglad21]

Bedliner sprayed in this week looks almost too good to cover with a tonneau—first world problem.
first experiment with using the 1UP bike rack, share more on that in bike-rack thread.

 

[TrainMan]

My sister bought me some Eugene the Jeep decals. Eugene was Popeye's pet who had some unique supernatural abilities. His breed was a "jeep". This was in 1937 before the Willys Jeep was produced.

 

[Blue Ridge]

I ordered a couple pelican 2975 and a yeti 65 to fit in the back . Keeps everything clean and dry. Fit perfectly and when your tailgate is locked people cant get in them because you cant get at the latches . Still room to put a power saw , chairs ,fuel cans. And stays below box height

Those look like they were made for it! Do you think they will fit under a tonneau cover?

 

[IamAlan]

Where did you find the coupler/knuckle hitch cover? I worked in a foundry in the 70's (Buckeye Steel) and we poured and finished a million of them, along with bolsters and frames, for Pullman Standard, FMC, and others.

 

[Armsbearer]

Mod #1: Installed Mopar locking gas cap I took off from my traded-in 2018 JLR to my 2021 JT Mojave.

 

[AZCooWhip]

Today AND yesterday. Underwent the task of front and rear bumpers from @RebelOffRoad as well as lighting from @rigid for both AND front and rear AND Summit side steps from @RebelOffRoad.

2 good days of work with a tangent here and there on the installs. All complete except for the wiring of the rear Rigid Midnights. Need to get A few extra feet of wiring.

You know you are in it to win when you are taking an angle grinder to a vehicle with less than 5,000 on the clock. Yes, i have questioned my sanity a couple of times this weekend.

Wife was a huge help in getting the work done. She wrenches as best as the rest.

 

[mx5red]

I'm pretty sure that is just the tire rolled up to the jeep

Upon further review, I am a moron.

 

[Deleted member 28696]

I painted the stock floor mats lettering with Acrylic paint pens Red since they only came in black. I added sill guards and painted the Gladiator Lettering as well. Got the idea from RobMotives youtube channel he did some sill plates in green but I did mine in red and took it a step further by doing the mats in the same Red color. It's not a true Red, I did a couple of coats to darken the color but it does match the Rubicon stitching, steering wheel that's in the vehicle. We will see if the paint holds up against boots and shoes etc. If not I can always purchase the Mopar Red Letter mats down the line. I thought it was a good idea.

 

[mx5red]

Today AND yesterday. Underwent the task of front and rear bumpers from @RebelOffRoad as well as lighting from @rigid for both AND front and rear AND Summit side steps from @RebelOffRoad.

2 good days of work with a tangent here and there on the installs. All complete except for the wiring of the rear Rigid Midnights. Need to get A few extra feet of wiring.

You know you are in it to win when you are taking an angle grinder to a vehicle with less than 5,000 on the clock. Yes, i have questioned my sanity a couple of times this weekend.

Wife was a huge help in getting the work done. She wrenches as best as the rest.

I love the step on that rear bumper

 

[AZCooWhip]

I love the step on that rear bumper

As do I. As I was looking at brands this one stood out because of that. Ultimately went with them because of this feature and other things I have purchased. Really good stuff.

The side bed steps are really cool as well. Access to entire bed is so much nicer. These things are a beast

Sponsored