What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Wicknalter]

Wheeled with some Gladiator friends. Also my first time breaking something. The AEV supplied extended rear sway bar links are notably not long enough for their lift. Tore one and now I have noise and my trucks leaning. Also managed to fill my dif with water and sand after I buried it to the frame... Suppose I’m finally seasoned that I’ve broke some stuff.

Sponsored

 

[Ridgeline]

Installed my Rusty's bed sliders, Voodoo crossbar, and club sticker!

 

[DMXRacing]

Installed OE Euro spec Side View Mirror Turn Signals...
Ran the power wire to the Front Fender Lamp Harness...

 

[immaechu]

Installed my Rusty's bed sliders, Voodoo crossbar, and club sticker!

Hey I made those stickers!

 

[mx5red]

I have a 3.5 lift with 38s - there is some blockage but once you turn the wheel, its going to have close to 100% light output.

Also I have a sport so maybe with the rubicon you will be better off bc of wider axles?

I still haven’t had time to try to fab anything up, but I was looking at your pics again.
Would you have a cleaner line of sight if you mounted the lights under the bracket instead of on top?? Might get more light through.

 

[3ffi3nd]

Big day today....installed the turn signal LED's, and the switchback LED fog lights as well. Love the amber when you push the fog lamp button off, then on again. Last, we installed the Mopar side steps, they look great.

Who makes the fog lights please?

 

[3ffi3nd]

Installed OE Euro spec Side View Mirror Turn Signals...
Ran the power wire to the Front Fender Lamp Harness...

Where did you find the caps for the turn signal? Would you mind telling me the part numbers also?

 

[DMXRacing]

Where did you find the caps for the turn signal? Would you mind telling me the part numbers also?

I posted in another thread on the topic...

https://www.jeepgladiatorforum.com/forum/threads/export-euro-mirrors-fyi-built-in-turn-signal.39310/

 

[FLUndertaker]

Installed my Rusty's bed sliders, Voodoo crossbar, and club sticker!

tell me more about the rustys rear sliders. It looks like you need both the sliders and brackets if you don’t start with a Rubi, correct? Does the bumper need trimmed if not a Rubi bumper? I definetly like them being able to be used as a step but all in it looks like $600+, which is about half way to an entire rear steel bumper upgrade.

 

[HRDWURC]

installed PIAA horns, Bartact fire extinguisher, got a new room mate for the Jeep that gets better gas mileage and it has 4 more cylinders.

 

[JustinWPI11]

Installed my Rusty's bed sliders, Voodoo crossbar, and club sticker!

I love my KB Voodoo cross bars. Using them now for carrying my Mountain Bikes!

 

[texanjeeper]

Who makes the fog lights please?

These are Lasfit switchback fog light bulbs. There are other companies that make the same part.

 

[mjoneil]

I still haven’t had time to try to fab anything up, but I was looking at your pics again.
Would you have a cleaner line of sight if you mounted the lights under the bracket instead of on top?? Might get more light through.

It would depend on the lights I supposed but it makes sense, what you're saying. My lights stick out past the bracket so I wouldn't be able to put them down there. But if you get shorter lights, I don't see any problems.

 

[mike921921]

installed PIAA horns, Bartact fire extinguisher, got a new room mate for the Jeep that gets better gas mileage and it has 4 more cylinders.

I know this is subjective, but how are the new horns compared to the stock ones?

 

[RogueOne]

Sure!
They're fairly tucked in, which is what I wanted.

Do you have a link for these? I really like them.

Sponsored