1.5 level or mopar lift with 35’s?

[21Gladiator]

Ok guys hear me out. I just put some 35’s on my sport. I have a mopar lift on the way and I’m really reconsidering putting it on. I feel like I would like the way it would sit with a 1.5 level kit? I don’t want the mopar lift to sit too high and look funky with 35’s. I really like the way the tire to fender gap is right now. Post some pictures of your 35’s and level or mopar lift. Thank you

Sponsored

 

[SandSurfer]

Leave the leveling kit and add the Mopar 2" lift, increase your front bump stops to 3" and don't look back!!!! Picture of mine running 37's, no rubbing even @ full flex, the gladiators really need 37's to "fill" the wheel wells. Just my opinion.

 

[TJDave]

My buddy's blue Sport S Max Tow with a Teraflex 1.5" leveling kit and 35's.
If it was me, and I already had the Mopar lift on the way, I would install it.

 

[Ryan]

Here is my Sport with a hybrid solution that combines leveling, rubicon suspension and rubicon flares.

I’m happy with the way it looks but am considering 37’s (but don’t want to re-gear - currently running 4:10’s)

the cost isn’t cheap but likely better than the Mopar plus all the bits you need to make it complete.

I have about $1.2k in the fenders, take off suspension and TeraFlex 1.5 leveling.

the ride is great too.

 

[aceisback]

Where was this taken please? Sorry OP, just had to ask.

 

[TJDave]

My buddy's blue Sport S Max Tow with a Teraflex 1.5" leveling kit and 35's.
If it was me, and I already had the Mopar lift on the way, I would install it.

I forgot to add another buddy's Sport S Max Tow with the Mopar 2" and 35's for comparison.
My white JTR is on spacers. RC2.5"f/Daystar.75r and 37's.

 

[RodRecket]

Mopar 2", 1" teraflex level (counter the bumper/winch weight), AEV geo brackets, teraflex front/EVO rear track bars, 35x11.5 Toyo ATIII, AEV Salkta XR wheels (+25mm) No rubbing and I really like the look

 

[Dmehrl]

Mopar lift with 1-1/2 tereflex level up front. Nitro ridge grapplers 305/55r20 measure 32-1/2 “ tall installed. Sits perfect level. I like the look ! Mopar lift did make the ride a little more firm….

 

[Cripton805]

I had a 2.5" lift on my Wrangler with 35 x 12s and I destroyed my fenders offroad. If you plan to sticking to pavement. You might be good. But on a tight turn or any articulation. Your fenders are going to be torn out.

Ask me how I know. lol

 

[Bulldog10]

Ok guys hear me out. I just put some 35’s on my sport. I have a mopar lift on the way and I’m really reconsidering putting it on. I feel like I would like the way it would sit with a 1.5 level kit? I don’t want the mopar lift to sit too high and look funky with 35’s. I really like the way the tire to fender gap is right now. Post some pictures of your 35’s and level or mopar lift. Thank you

I Love the way the Sgt Major Looks, Rides and says I'm a Jeep! 2" Mopar lift with 35's!

 

[Fastwake]

I Love the way the Sgt Major Looks, Rides and says I'm a Jeep! 2" Mopar lift with 35's!

Same ser up I have and I love it

 

[DocMike]

Running 35s with the Rubicon takeoffs and a 1.5 Terraflex Level. May add some gobi rubicon Fenders. Will flex it out good once the storms pass the mountains. We have crap weather this weekend.

 

[Rockabillyroy]

I had a 2.5" lift on my Wrangler with 35 x 12s and I destroyed my fenders offroad. If you plan to sticking to pavement. You might be good. But on a tight turn or any articulation. Your fenders are going to be torn out.

Ask me how I know. lol

I ran 35s with a 2.5" teraflex lift, winch and aluminum bumper on my JKU and never rubbed. Even disco'd and full flex.
Maybe your font end was super heavy?

 

[Cripton805]

I ran 35s with a 2.5" teraflex lift, winch and aluminum bumper on my JKU and never rubbed. Even disco'd and full flex.
Maybe your font end was super heavy?

Nope. The only thing I added was rock rails. Sport JLU.

 

[Elkhunter1948]

Sponsored