What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[AZCooWhip]

Which size cooler is that?!

40q ... as said, only manufacturer that I could find in a decent size that will fit in bed with tonneau closed.

Sponsored

 

[Beewdawg]

40q ... as said, only manufacturer that I could find in a decent size that will fit in bed with tonneau closed.

Just got a 35q Magellan cooler that fits under my tonneau. Haven't used it yet, but I put a bag of ice in it yesterday, put it in the bed so I can see how long the ice will last back there.

 

[ThatStinging_Jeep]

Installed a Cascadia VSS solar panel.

Man I like that little solar panel location,would be perfect cause I know sun will hit that spot,says my burnt out eyes from driving from the hood glare ?

 

[Sportsbiz]

Man I like that little solar panel location,would be perfect cause I know sun will hit that spot,says my burnt out eyes from driving from the hood glare ?

It serves double duty in that sense! :D

 

[ThatStinging_Jeep]

Checked bump stop clearance, looks like I’ll have to add one more block in to keep the tire out of the fender

Man what lift kit is that ? The flex ain't half bad,I already have a metalcloak leveling kit so in really lookin for some new shocks
Also couldn't you do a fender chop on your fenders? to get more up travel and more overall flex

 

[SubiRubi]

Finally got my Metalcloak skids installed.. Nice quality! 2 week offroading trip to Sand Hollow, Moab and San Juans starting Labor day.. Should come in handy..

 

[JeepOfTheseus]

It serves double duty in that sense! :D

Loving mine, too. Nice look, and functional in multiple ways.

 

[TexasTJ]

2 week offroading trip to Sand Hollow, Moab and San Juans starting Labor day.. Should come in handy

When will you be where? I'll be in Moab around the 19th, and Ouray around the 24th.

 

[jorbasaurus]

This looks great! I wonder what it would look like on my black Willys?

From experience, it may not be worth your money. I made the swap on my granite crystal after seeing the black satin grille on a few other lighter colored JTs. Don’t get me wrong I like it more than the color match, but it really isn’t noticeable unless in good sunlight, I’d assume your black paint will cause the same. I’m good with it bc I notice and like it, but probably wouldn’t do it again if given the option.

 

[Animal]

Wired up the oracle led strips under the trail rails. The built in lights weren't much use after installing molle panels.

 

[VolatileA]

Wired up the oracle led strips under the trail rails. The built in lights weren't much use after installing molle panels.

Were the RC molle panels direct bolt on or was drilling required?

 

[Sespe]

It serves double duty in that sense! :D

That was actually one of the reasons I bought mine...

 

[FloridaJT6MT]

Were the RC molle panels direct bolt on or was drilling required?

The front panel mounts to existing holes. Had to add nutserts to a couple holes that didn’t have them from the factory though. The side panels require drilling but it was very easy. I think 3 holes on each side panel to add nutserts. Overall, I’m really happy with my RC panels, especially for the cost compared to others out there.

 

[stil2low]

Man what lift kit is that ? The flex ain't half bad,I already have a metalcloak leveling kit so in really lookin for some new shocks
Also couldn't you do a fender chop on your fenders? to get more up travel and more overall flex

I’m running my 3.5” RK lift with their RRD shocks from my JL up front with a 3/4 daystar spacer in the back.
I definitely could but the 35’s look small enough as is, do the fender chop I’ll be wanting 37’s sooner hahaha. Was surprised to see the tire trying to eat the fender that much, quite the difference between the narrow and wide axles. JL wasn’t remotely close running the same bump stop

 

[FISCH]

Not really TO the JT but I bought a small trailer I’m going to convert to a camping/over landing home base. Going to try to utilize my takeoff wheels on the trailer.

Sponsored