What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[JTBurns]

My new Rock Hard aluminum bumper finally installed today! My brother in law helped me (ok, he did most of it!) It took about 2.5 hours. It weighs 37lbs which is nearly identical to the mostly plastic oem bumper.

Nice! Haven't seen that one but I like it. Did you reuse your stock fog lights?

Sponsored

 

[TrainMan]

Nice! Haven't seen that one but I like it. Did you reuse your stock fog lights?

Yes it was quite simple. They include an adapter and some self tapping screws.

 

[Lucky1]

Installed these today. No intention of hanging lights on them, really just wanted a hand-hold for when I'm washing/waxing and cleaning the winshield.
https://www.amazon.com/gp/product/B08VRMZ1Q8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Curious as to how well that will work. Sounds like a great idea if it goes as planned!

 

[USMC-SSGT]

if I ever re-gear to 4.88’s, I will definitely mount a set of the Mickey Thompson Baja Boss AT’s. Those are Bad A$$ tires.

They are awesome. Honestly the best tire I’ve used yet. Because it’s my daily driver, how quiet they are is the best part…..but they are heavy and I’ll be doing a re gear in the spring. In the northeast though that job starts at $2500. Will give me a good reason to get 37s though.

 

[mike921921]

Curious as to how well that will work. Sounds like a great idea if it goes as planned!

Works good to grab and pull myself up as I step up on the running board ?.

 

[XJADDICTION]

I’ve thought about lifts, tires, wheels. Programers front bumper winch

so I did a 3.5 Rubicon Express Lift, I’ve had RE on many Jeeps and always thought the ride was very good as they set the spring rate and even their base shocks to the Jeep they are going on (factory specs of course, not thinking about added weight).

1st the disappointment with this lift is that they use a 2-2,5” rear spring and a 3-3.5” front that will level the NT and I don’t like that, plus I have weight with rack and gear so that means this would probably “Bull Dog” the JT and then all I would need is a set of gold or silver truck nuts to round it out….
So yes the rear sits about an inch lower than the front after lift but I have an Arcus front bumper and a smutty built 10K winch synthetic line for the front (I know, just wanted to try SB and it was easy to get). Maybe that will level the jeep out with weight on the front.

I am going to add a 1” spacer to the front and a 2-2.5” in the rear.

for now though I am very surprised at how well the JT Max Tow with 4:10’s rides with 37 BFGATKO2s with the tazer and RE lift with base shocks this is a RE kit so had all the brackets and a new beefy Trac-bar adj.
This set up is very smooth, has plenty of power, I honestly think it has more power although I don’t see 8th gear much. That said cruising at 70-75 even 80 (which I don’t need to) the performance and ride is way better than stock. Sure mpg will go down and it drives like a jeep with 37’s with all of that side wall. No hint of DW, no wander just quiet and smooth.

this is the set up of y’all want a fairly budget friendly lift and daily drive your JT. I love it!

All of the pictures I have for now

 

[dbryson]

Installed these today. No intention of hanging lights on them, really just wanted a hand-hold for when I'm washing/waxing and cleaning the winshield.
https://www.amazon.com/gp/product/B08VRMZ1Q8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

They look more grey than black as described by Amazon

 

[shredX]

Looks great, XJADDICTION!!!
Did you add wheel spacers? If so, what size?

 

[mike921921]

They look more grey than black as described by Amazon

I would say 'dark grey', but def not black.

 

[dbryson]

I would say 'dark grey', but def not black.

Thanks. I might give these a try for the Sting-grey.

 

[XJADDICTION]

Looks great, XJADDICTION!!!
Did you add wheel spacers? If so, what size?

thank you, no wheel spacers yet they are on order and should be here next week. I don’t have any rub issues with the Max Tow wider axles with out them but I think the ride stability will improve and definitely look better. I am using Hub Centric 1.5” on stock Rubicon Wrangler wheels. My spare is an aftermarket Quadratec copy of same wheel but a 17x8.5 with 5.2” back spacing (stock Rubicon Wheels are 17x7 with I think 6.5” back spacing). I may buy 3 more of aftermarket wheels and nix spacers eventually. At the time I could only get one of them.

 

[SargeDiesel]

That looks great! I've considered debadging mine, and always hated the obvious outlined Gladiator sticker decal. Never understood Jeep using that when it's so easy to print one without an outline. I picked up an 80th anniversary plate I replaced mine with.

Hey bud, is that Sarge or Gator green ? Badge looks great !

 

[DirkG]

Hey bud, is that Sarge or Gator green ? Badge looks great !

Hopefully Blue Ridge doesn't mind me responding; that's Sarge. Unless I have my timing wrong, there shouldn't be any Willys Gators.

 

[Zswickliffe]

Installed these today. No intention of hanging lights on them, really just wanted a hand-hold for when I'm washing/waxing and cleaning the winshield.
https://www.amazon.com/gp/product/B08VRMZ1Q8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Wonder if those would be OK tie down points for things on the roof.

 

[SargeDiesel]

Hopefully Blue Ridge doesn't mind me responding; that's Sarge. Unless I have my timing wrong, there shouldn't be any Willys Gators.

Ah.. that makes sense... with so many models and combinations , it's hard to keep up with them all. THANKS

Sponsored