What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Gene26]

Ordered some parts for the dadiator. Metalcloak 3.5 dual rate lift, the last set of Falcon 3.1 shocks in the country for my lift and a set 37 inch nitto terra grapplers!!!!! FedEx guy is going to hate me

Sponsored

 

[IanNubbit]

Changed the silver adjustable latches to black and put in rivnuts to keep them attached to the bed so I can lock the soft tonneau down when I need to. Jeep would probably charge $500 for these $30 latches with a Mopar logo. Just waiting on some black m5 bolts and its all done.

Is there a thread that shows these?

 

[Angry]

Installed Seat Slammers. I had the Jackers in and liked the angle but I’m tall and my hair was brushing the roll bar. The Slammers make a dramatic difference. Highly recommended if you’re over 6-2. (Jackers now for sale in the Market Place!)

i also put on a Sunrider and love it long time.

 

[ShadowsPapa]

$1600 crate, with free 2inch lift inside installed.

Damn I knew plywood had gone up but geesh....... good thing they threw in the lift kit to compensate.

 

[Comicnut25]

I TRADED HER IN !
Old Sport (Baymax)
New Rubicon Gecko (Name Pending)

 

[ygrignon]

Installed the new Oracle LED skid plate.

Would you mind posting a review of these in the Lighting forum? You seem to be one of the select few that already got them.

 

[Len]

I installed the synergy sector shaft brace. My steering was pretty good before, I will say the steering does feel more responsive and I am not making all the little steering inputs anymore.

 

[Gren71]

I installed the synergy sector shaft brace. My steering was pretty good before, I will say the steering does feel more responsive and I am not making all the little steering inputs anymore.

Do your have the (black) steep steering box or the (silver) aluminum box?

 

[Rubi_Rhod]

are you able to use the Redline struts in conjunction with the AmFib snorkel? i was wanting on doing the same but had read that these two parts were not compatible as the strut interfered with the snorkel sleeve under the hood.

Yes you can

 

[Volksparts]

Thanks to Don @pixeldecals and his products I installed his tailgate, hood and vent decals. Everything looks great so far. Also Limitless GLADIATOR Badge installed.

 

[AlbizzleFoShizzle]

Havent done anything just yet but I just received my new ARCUS rugged ridge bumper, red gear America DRing shackles, & the Warn 10evo winch. Super stoked to install it come Monday!

 

[JWagon]

Made some freedom panel headliners out of a BedRug’s Track Mat.

 

[19Comanche86]

Got the passenger seat done…kinda…took forever because I’m still not 100% from covid but also this was my first time doing this. Install wasn’t bad, however the side zippers are cheap quality. While zipping the left side up the zipper broke off. So now I can’t close that side of the seat. Gonna try a zipper repair kit or just take it to an upholstery shop and have them stitch it closed. Very happy otherwise. When I do the other seats extreme caution will be used at the zipper area. Hog rings were a bit of a learning curve but once figured out it’s easy.

just gonna do one seat at a time so this might take a while lol

 

[The White Rabbit]

Got the passenger seat done…kinda…took forever because I’m still not 100% from covid but also this was my first time doing this. Install wasn’t bad, however the side zippers are cheap quality. While zipping the left side up the zipper broke off. So now I can’t close that side of the seat. Gonna try a zipper repair kit or just take it to an upholstery shop and have them stitch it closed. Very happy otherwise. When I do the other seats extreme caution will be used at the zipper area. Hog rings were a bit of a learning curve but once figured out it’s easy.

just gonna do one seat at a time so this might take a while lol

Dammit!

 

[abe57]

Installed the Mopar Trailer Brake Controller.

Dumb that Max Tow doesn't include these.

So how did you manage to get one of these ? Mine is on back order !

Sponsored