What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[jimonfly]

Glad you like it, and thanks for the great communication!

Sponsored

 

[XJFanatic]

Swapped out the plastic running boards for some rubi rails I have been tripping over for the past month. Also spent way too much money and ordered a smartcap evo sport. Owning two Jeeps helps keep my wallet thin and lower back aligned.

 

[JeepOfTheseus]

As part of finishing the rewiring, I added this cargo box and fog lights. This was definitely the worst thing to wire as it came with no pre-installed lights or cable management.

 

[antwon412]

Picked up a CMM Ram mount for the grab handle. Well probably primarily use it to hold my Garmin inReach GPS tracker. But I’ll probably pick up some sort of mount for my phone as well.

here’s a terrible photo -

 

[johnparjr]

Finally got around to installing a new GMRS antenna been sitting on this project for months. Waiting on 1 piece that I misjudged the length but that will be here in 2 days.

hooked it up to the meter and had to do a little cutting on the antenna to get it between 1.0 and 1.5 ended up at 1.35 so all is good

 

[ClaytonH]

Finally got it lifted after almost a year of ownership. 3.5 inch rough country coil lift with their v2 vertex shocks. Tires are 37x12.50r17 Cooper STT Pro mounted on the factory wheels amd 1.25 inch wheel spacers. Plan to get a set of the Quadratec Morphic wheels when they go back in stock so I don't have to run spacers anymore. Pretty happy with how it turned out and the V2 shocks from rough country ride fantastic.

 

[TheTrailGeek]

Added a Baja Designs ONX6+ to the LOD destroyer bumper today.

 

[TheTrailGeek]

Finally got it lifted after almost a year of ownership. 3.5 inch rough country coil lift with their v2 vertex shocks. Tires are 37x12.50r17 Cooper STT Pro mounted on the factory wheels amd 1.25 inch wheel spacers. Plan to get a set of the Quadratec Morphic wheels when they go back in stock so I don't have to run spacers anymore. Pretty happy with how it turned out and the V2 shocks from rough country ride fantastic.

Looks great!!

 

[ClaytonH]

Looks great!!

Thank you! I couldn't be any happier with the way it turned out!

 

[DailyMoparGuy]

Finally got it lifted after almost a year of ownership. 3.5 inch rough country coil lift with their v2 vertex shocks. Tires are 37x12.50r17 Cooper STT Pro mounted on the factory wheels amd 1.25 inch wheel spacers. Plan to get a set of the Quadratec Morphic wheels when they go back in stock so I don't have to run spacers anymore. Pretty happy with how it turned out and the V2 shocks from rough country ride fantastic.

Looks perfect….sits just high enough with a nice tire poke and fender gap ??

 

[culdbbi]

Installed the Oedro Soft Rollup Tonneau this evening. About a 30 min install, but half of that was me trying to get the back to shut. Then I realized there was some weather stripping that needed to be trimmed. Once I did that and got a little aggressive with it, we came to an understanding. This sub $200 cover (cuz it's on sale) comes with a locking mechanism, so I'm happy with it.

Right now there is 15% off for valentine's day.

Oedro Soft Rollup Tonneau

 

[atxatxatx]

Installed a Tazer Mini, I've had a JSCAN for some time - but wanted the added features of the Tazer + plus it's easier to access and use.

 

[Chuck-a-Palooza]

Finished my DIY trail rails today. 1 10 ft 1 5/8 in Superstrut from Lowe's. Cut to 2 50.5 in halves - just did left and right, not front of bed. 6 #10 20 bolts, washers. Painted it black and bolted on the existing holes. Spray in liner so it was hard to get the bolts started.

Looking to buy a Mopar soft roll tonneau next - I want this one because it doesn't use rails...

 

[Ar4130]

Finished the front half of my AEV 2 inch spacer lift with the Mopar control arms and JKS track bar. Sitting pretty level. Not sure if I wanna install the rest of the 2" kit in the rear or go with a 3/4 daystar spacer in the rear instead to take out some rake (aev kit keeps the stock rake). After that its wheels and tires. I can't stand the silver wheels.

 

[mbbq22]

After getting an engine replacement, I did the majority of my break-in miles and then got a SteerSmarts Trackbar installed as well as the mopar lift lower control arms and a daystar 3/4 rear spacer to go along with my teraflex level on the front. Right now loving the stance and I can say that the trackbar has made a significant change to the feel of the handling day to day. Feels heavier and more steady for sure!

Sponsored