What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[Jeepin' John]

JK Saltas on 285/75/17 KO2's!

Sponsored

 

[Devil Dog]

Hey Devil Dog, thanks for the cool idea.

No worries.
Looks great, man! Good job

 

[troymi]

Tires are Nokian Rotiiva AT Plus. LT315/70/17. D-8 ply. Only ran a few hundred miles so far. Excellent performance. Not hard core and a little visually challenged compared to KO2/Wildpeak/Duratracs. I will do a write up on them soon in the tires section. Ice/snow traction is best I’ve had in non-winter specific tire.

 

[phranican]

Spacer "lift" is on, 1" tf front, 3/4" daystar rear, with Mopar lca. The goals were getting the wheel well gap closer to stock after installing the 35s and better handling.

 

[Chuck]

Ordered RSE slider steps.....

 

[NonHyphenated American]

Installed Teraflex leveling kit only using 1" spacer ontop of brand new 340/343 springs. The rubber isolator is about .5" thick, so glad I did not put on the .5" spacer. Before was 34.5" front and 37" rear as measured at the bottom lip of the fender flare in line with the wheel hub. After was 37.25 front and 37" rear. Looks like the front is starting to settle. I put brand new rubicon suspension on the JL I had before this and the springs settled .5" over night so Im confident the front will settle to or just slightly below 37.

 

[NCSteve83]

Footwell lighting

 

[Sportsbiz]

Mopar 2” lift installed.

 

[bailer]

What mud flaps are those?

Hey, sorry I missed your question….. those are the WeatherTechs.

 

[Living the dream]

Hey, sorry I missed your question….. those are the WeatherTechs.

Thank you. I ask because I can’t seem to find WT which fit the JTR/JTM bigger fenders.

 

[bailer]

Thank you. I ask because I can’t seem to find WT which fit the JTR/JTM bigger fenders.

Here is a pic of my actual boxes, and a screencap from their Canadian$ site. The front 110100 box I wasn’t sure about but they do fit and the holes line up……

The front and backs come with bolts, but I used large head plastic rivets to mount them. It was quick and easy. My thinking is the fenders are just plastic clip and riveted together so good enough. (I’d rather rip off a flap than a fender)

 

[T-Rock]

35x12.5x17 KO2's installed on stock wheels

 

[sizmtrz]

Finally finished up my custom subwoofer install.

do you mind breaking down the build and install? why are they offset? Thanks

 

[BLK HOLE]

37s to 39s. New wheels.

 

[XraytecH]

Last piece of the LED puzzle… for now.

Installed Take-Offs from eBay, MOPAR Fender Lights.

Oracle Ligths all 4 corners
Amazon LED courtesy lights

Sponsored