What did you do TO your Gladiator today? [ADMIN WARNING: NO POLITICS, NO GUN TALK]

[USMC_1Wire6337]

I was reading about people fussing about the key so I riveted a magnet to mine so that I can close it and not fuss about the key stuck in the lock. Worst case scenario, I can stick it underneath the seat to hide it or under the bumper if I don't feel like carrying it around.

That is a genius idea. I am definitely stealing that one if I get the lock box.

Sponsored

 

[captain kilroy]

When you guys set your display to show what gear your in, do you have to reset it every time you restart the vehicle?

 

[WhyNotJeep]

Finished the front bumper

 

[badtux]

Added a tonneau cover. Bakflip MX4. Not impressed by the provided hardware and still some adjusting to do but I ran out of daylight.

 

[Dougstdig]

Installed the Mopar trail rail system.

 

[Green_Gladiator]

Looks great- how do you like the EXP tires?

Thanks my friend .. at only 64lbs for a 35 inch tire, the weight is equal to the stock wild peaks and the noise level is equal to the wild peaks .. So far very happy! .. havent been on the trail yet to report back ...

 

[Trauma PA]

It's been a while since I've posted in this thread but there have been a few additions to the Money Pit...

Rough Country front & rear bumpers. These things are stout!

Tailgate board

JCR Offroad overhead molle panel. I used this to relocate the GMRS off the dash and was super happy with the results. There is also a 12V & ground Anderson Power Pole style connector tucked on top of it for future power needs. If your running one cable, might as well run two just in case.

Swapped out the Bulletpoint Mount for a Ram Systems mount. Much more sturdy!

Tuffy Center Console lockbox.

I was reading about people fussing about the key so I riveted a magnet to mine so that I can close it and not fuss about the key stuck in the lock. Worst case scenario, I can stick it underneath the seat to hide it or under the bumper if I don't feel like carrying it around.

Do you have the back up sensors in your rear bumper? If so, any issue with reinstalling into the new RC rear bumper?

 

[FLUndertaker]

It's been a while since I've posted in this thread but there have been a few additions to the Money Pit...

Rough Country front & rear bumpers. These things are stout!

Tailgate board

JCR Offroad overhead molle panel. I used this to relocate the GMRS off the dash and was super happy with the results. There is also a 12V & ground Anderson Power Pole style connector tucked on top of it for future power needs. If your running one cable, might as well run two just in case.

Swapped out the Bulletpoint Mount for a Ram Systems mount. Much more sturdy!

Tuffy Center Console lockbox.

I was reading about people fussing about the key so I riveted a magnet to mine so that I can close it and not fuss about the key stuck in the lock. Worst case scenario, I can stick it underneath the seat to hide it or under the bumper if I don't feel like carrying it around.

Why not just get the combo lock?

 

[OngsterA]

JCR Offroad overhead molle panel. I used this to relocate the GMRS off the dash and was super happy with the results. There is also a 12V & ground Anderson Power Pole style connector tucked on top of it for future power needs. If your running one cable, might as well run two just in case.

Swapped out the Bulletpoint Mount for a Ram Systems mount. Much more sturdy!

Tuffy Center Console lockbox.

I was reading about people fussing about the key so I riveted a magnet to mine so that I can close it and not fuss about the key stuck in the lock. Worst case scenario, I can stick it underneath the seat to hide it or under the bumper if I don't feel like carrying it around.

I like these upgrades, will look into that panel and lockbox, and agree Ram Mounts are way more stout than Bulletpoint, they make all types of solid mounts.

 

[Serik]

Installed the Harbor Freight Badlands winch. Someone in another thread mentioned that it was a tight fit in the venator bumper and they weren't kidding. This is also my first ever winch install and I can't believe it's only 4 bolts holding it to the winch plate for a 12,000lb capacity...

 

[Beewdawg]

Mickey Thompson Baja Legend EXP 35x12.5x17... Matte Bronze Fuel Shok D666

That's a good-looking truck

 

[Nigelcorn]

When you guys set your display to show what gear your in, do you have to reset it every time you restart the vehicle?

I don't. I set it once and that's it.

 

[Mojave2021]

Thanks my friend .. at only 64lbs for a 35 inch tire, the weight is equal to the stock wild peaks and the noise level is equal to the wild peaks .. So far very happy! .. havent been on the trail yet to report back ...

nice! When you get a moment would you mind posting a pic from the front? Thanks

 

[Mojave Mōbe]

Finally got around to doing the fender chop. Parts have been sitting in my garage for over a month. Went with the Quake, smoked lens kit.

Opened up the box to install the inner fender liners and found these instead.

Guess I should've opened the box when it arrived and not sat on it for a month. ?

 

[ChillxPoint]

Installed the Mopar trail rail system.

Where did you buy the extra tie down brackets?

Sponsored